“This site contains affiliate links for which OEMDTC may be compensated” |
October 25, 2022 NHTSA CAMPAIGN NUMBER: 22V803000
Seat Belt Anchor May Detach from Seat
An improperly tightened seat belt anchor can detach during a crash, increasing the risk of injury.
NHTSA Campaign Number: 22V803
Manufacturer Porsche Cars North America, Inc.
Components SEAT BELTS, SEATS
Potential Number of Units Affected 15
Summary
Porsche Cars North America, Inc. (Porsche) is recalling certain 2022 911 GT3 vehicles. The screw that attaches the lower seat belt anchor to the seat frame may not have been tightened properly.
Remedy
Dealers will replace and tighten the screws. If the screw threads are damaged, the seat frame will also be replaced. Repairs will be performed free of charge. Owner notification letters are expected to be mailed December 23, 2022. Owners may contact Porsche’s customer service at 1-800-767-7243. Porsche’s number for this recall is ANB6.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Porsche has a Recall
ANB6 – Checking Threaded Joint for Seat BeltMount at the Left and Right and Replacing Seat Frame if Necessary (Recall Campaign)
Model Year: | As of 2021 up to 2022 |
Model Line: | 911 (992) |
Equipment: | Full bucket seats (M-no. Q1K) |
Concerns: | Threaded joint securing seat belt mount to driver’s seat and passenger’s seat |
Cause: | Due to a process error in the production run, on affected vehicles the screw connection of the belt end installing on the driver’s seat as well as the passenger seat may not comply with the specifications.
If this is the case, the functionality of the screw connection cannot be ensured in the event of an accident and thus loosening of the seat belt attachment cannot be ruled out. |
Action required: | Check the screw connection for the belt end installing on the driver’s seat and passenger seat and replace the seat frame if necessary. |
Affected Vehicles: | Only vehicles assigned to the campaign (see also PCSS Vehicle Information) |
Work Procedure:
Chronology :
In late July, 2022, Porsche received a notification of a vehicle with a loose lower seatbelt anchor during postproduction inspection.
Subsequently, from August to October 2022, an in-depth field analysis was carried out in order to identify any field issues. No field issues were identified. In parallel, Porsche investigated how many vehicles could have been subject to the same assembly procedure deviation. The investigation of potentially affected vehicles included the review and analysis of stored screw data, which had to be obtained from an external service provider.
October 19, 2022, upon review of production records, it was determined that 15 vehicles in U.S. could have been affected by the assembly deviation and would be recalled.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
PORSCHE | 911 GT3 | 2022 |
7 Associated Documents
Defect Notice 573 Report
RCLRPT-22V803-1608.PDF 215.401KB
Recall Acknowledgement
RCAK-22V803-4911.pdf 645.793KB
Recall 573 Report – November 1, 2022
RCLRPT-22V803-1990.PDF 215.424KB
Porsche – ANB6 Recall PPN – November 2022
Remedy Instructions and TSB
RCRIT-22V803-4653.pdf 276.579KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V803-7415.pdf 110.963KB
Remedy Instructions and TSB
RCRIT-22V803-5777.pdf 286.028KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V803&docType=RCL
- 【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 【Multi Systems Diagnostic Scanner】The AUTOPHIX 3210Pro bluetooth OBD2 Scanner is designed to help vehicle owners diagnose issues with critical systems such as Engine, ABS, SRS and Transmission. Diagnose the car system by deep scanning, reading error code and clearing code after car repaired. The four-system diagnose is available for 13 major brands currently (Compatible with Mercedes Benz, BMW, Volkswagen, Opel, VAUXHALL, Volvo, Landrover, PEUGEOT, Renault, Ford, GMC, Chrysler, Toyota). We will be optimizing and adding other models in the near future. If you are not sure if the 3210Pro supports your car, please confirm with our professional customer service team through the Amazon message.
- 【Full OBD2 Function & Battery Monitoring】The 3210Pro wireless scanner supports all OBD2 vehicle includes 200+ automotive brands and 200,000+ models in worldwide such as sedans, SUVs, minivans, light trucks, etc. When it's an OBD2 code reader, you can use it to check if your car is ready to go through the annual testing by I/M menu. And the bluetooth auto scanner captures battery voltage in real time, ensuring that you can analyze accurate real-time data to determine the health or expected remaining life of the battery. In addition, built-in DTC library, real-time data streaming, data playback, performance testing and many more of these features are also supported by it.
- 【Wide Range Diagnose for Four Systems】3210 Pro bluetooth car diagnostic tool with strong compatibility. 🚖 Asia: Toyota, Lexus. 🚘 America: FORD, LINCOLN, MERCURY, BUICK, CADILLAC, CHEVROLET, GMC, HUMMER, OLDSMOBILE, PONTIAC, SATURN, WORKHORSE, ALPHEON, DAEWOO, HOLDEN, RAVON, CHRYSLER, DODGE, JEEP; 🚔 European: LAND ROVER, JAGUAR, VAUXHALL, OPEL, MERCEDES BENZ, SPRINTER, SMART, BMW, MINI, ROLLS-ROYCE, VW, AUDI, SKODA, SEAT, BENTLY, LAMBORGHINI, BUGATTI, VOLVO, PEUGEOT, CITROEN, DS, RENAULT, RENAULT SANSUNG MOTORS, DACIA; More vehicle models coming soon. (PS. OBD Functions are available on all vehicles worldwide after 1996)
- 【Reliable Car Health Monitor】The OBD scan tool not only supports four-system diagnostics (Engine, ABS, SRS and Transmission) and full OBD2 function (clear code, check engine trouble code, VIN, etc), the OBDⅡ scanner diagnostic tool also allows you to measure data such as 100 km/h, acceleration time, top speed, engine coolant temperature, etc. The Trip analysis allows you to access data at any time, such as average speed, average fuel consumption, etc. It analyzes driving data to optimize your driving behavior over time and improve driving safety. It also supports personalized head-up display with custom dashboard function. And you can set alarm tips to improve safety while driving.
- 【Stable Connection】The new upgraded bluetooth code reader with updated Bluetooth 5.1 tech., you just need to turn on bluetooth and enter the application page (make sure the scanner is properly plugged into the OBD port of the vehicle), there is no need to enter the Bluetooth pairing settings, just wait 1 second, the car code reader will automatically recognize the bluetooth signal, and then start your car's diagnostic journey.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.🚦📢Kindly note: AL619 only supports 2015 or pre-2015 cars. And services are not universal, please send us your car VIN# to check the compatibility before ordering.📩immoautel @ outlook . com📩.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner with SD card only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only, but not for Mac and ios system. 📧Any concerns, pls feel free to 𝙚-𝙢𝙖𝙞𝙡 us via 𝙖𝙢𝙖𝙯𝙤𝙣 @ 𝙖𝙣𝙘𝙚𝙡𝙩𝙚𝙘𝙝. 𝙘𝙤𝙢.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 automotive scanner diagnostic tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use this obd2 scanner with abs and srs to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 OBD2 scanner diagnostic tool also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【A/T TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the A/T transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. This transmission scanner provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 obd2 scanner with abs and srs is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- The VD500 OBD2 scanner is specifically designed to diagnose Volkswagen Group (Fits for VW/Audi/Skoda/ SEAT) 12-volt 16-pin vehicles, but can also be used with other 12-volt (non-Volkswagen) and light trucks (non-electric) vehicles manufactured in 1996 or later that are OBD II -compliant with standard 16-pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN).
- For Volkswagen (VAG) vehicles diagnostics, the device can not only read and clear codes on engine, ABS, transmission, SAS (not all cars), ESP, TPMS and other systems, but also reset the oil, brake pad and throttle position adaption.
- For other OBD II vehicles (non-Volkswagen), the VD500 can read and clear fault codes, display fault code definitions, turn off the CEL (check engine light) and retrieve VIN information ONLY.
- The VD500 diagnostic offering for Volkswagen vehicles covers the following vehicles: fits for VW (CC, EOS, Golf, GTI, Jetta, Passat, Phaeton, Polo, Rabbit, Sharan, Tiguan, Touran, Touareg); fits for Audi (A3, A4, A6, A7, A8, A5, Q3, Q5, Q7, R8, RS3, TT, RS, RS5, S4, S6); fits for Skoda (Octavia, Rapid, Yeti, Kodiaq, Fabio, Superb); fits for SEAT (Leon, Ateca, Ibiza, Altea, Cushion, Cord, Alhambra) Diagnostics.
- With English and German as display languages, this diagnostic scan tool support costs nothing to lifetime software updates to fix the latest bugs or add new parameters. Simply download the software from the official website, then follow on-screen instructions to install it.
- Most Affordable ABS Bleeding Scan Tool - Is the brake pedal always slowly sinking down or becoming loose? This obd2 scanner with ABS auto bleed will achieve a tight brake pedal to solve the issues you encountered. Coverage check before purchasing via FOXWELL official site: Support- Diagnostic Coverage List. Tip: It won't work on vehicles lacking an AUTO bleed function.
- More Than a Entry Level OBD2 Scanner - Based on the NT301 FOXWELL Scanner, NT630 Plus car scanner takes OBD-II diagnostics to the next level by in-depth insights on ABS/ Airbag Diagnostic Trouble Codes, Wheel Speed Sensor, Airbag Circuits, Cable Connectors Monitor, etc... The graphic live data provides intuitive view on car conditions. Note: This scanner DOES NOT work on Airbag crash data/programming issues.
- No More Higher End Service than You Need - One NT630 Plus is enough! This SRS ABS scanner will perform daily reset services like ABS/Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset, etc... These issues will be restored after the car faults repaired. Tip: Reset service will be vary on different car makes and models, please confirm the coverage before purchasing.
- Also can Work like NT301 - This code reader for cars also can Check Engine Light, diagnose OBD-II modules instantly, display the Live Data, locate bad sensors and indicate I/M readiness status before the annual inspection. Reducing the potential driving risk and keep a peak performance on the road.
- Higher-level Services wih Lower Cost - Cost less to own a ABS SRS Bidirectional Scan Tool that is not found on similar code readers & scan tools. This car diagnostic scanner allows you to test all potential car faults in the ABS/Airbag system, with functions returning to normal once you exit the program. Please note, that only ABS/SRS modules are supported.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- ABS/SRS OBD2 Scanner > Enjoy this ABS SRS OBD2 code reader to reveal exact issues underlying in your brake, airbag, and engine systems, test individual ABS/SRS sensors, valves, or solenoids to quickly locate malfunctions (compatible with GM, Nissan, Fiat, Benz, Volvo, Land Rover, BMW, USA Ford, please reach us for details.), making sure critical safety systems work in perfect harmony together against accidents to be safe than sorry. NOTE: Only support upgrade on windows.
- 3 Most Needed Service Functions > This TOPDON OBD2 scanner guides you through step by step procedures to reset oil service light and programmed mileage intervals for engine efficiency (Oil Reset); to calibrate steering wheel position for vehicle’s traveling in a straight line (SAS Reset); to clear the original low battery fault information against coming battery failures or damage (BMS Reset); saving your needless visits to mechanics. NOTE: Not suitable for all models, please reach us for compatibility.
- Full OBD2 Diagnostics > Say goodbye to the hassle of manual check-ups via this srs bi-directional code reader. Quickly correct Check Engine Light warning on most OBD2/CAN compatible vehicles. Easily access to your smog status with one simple click I/M Readiness; and being filled with features for live data readings, freeze frame data, plus EVAP system, onboard monitor test means this scan tool checks all daily car care boxes.
- Work Easier > Red-Yellow-Green LEDs in this OBD2 diagnostic scanner TOPDON Arilink600 quickly show the overall DTC status without toggling through menu selections. HELP hotkey takes you directly to detailed descriptions/tips. Read/Erase DTC, I/M readiness shortcuts are added for optimized operation, along with DTC Lookup library for interpreting codes, designing the SRS OBD2 reader diagnostic tool a pleasure to use right out of the package even for beginners.
- Helpful Service > Get instant, free lifetime access to the most recent updates to add new car models and troubleshooting bugs making the OBD2 scanner TOPDON AL600 a long-term investment for any home mechanics. The extended 1 years of quality assurance sweetens the worry-free deal even further. Multilingual Menu: EN, FR, ES, DE, IT, RU, PT, and JP. NOTE: Only support upgrade on windows.
Last update on 2024-07-25 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Technical Information 911 (992) 239/22ENU ANB6 7 ANB6 – Checking Threaded Joint for Seat BeltMount at the Left and Right and Replacing Seat Frame if Necessary (Recall Campaign) Revision: This bulletin replaces bulletin Group 7 239/22 ANB6, dated December 16, 2022. Model Year: As of 2021 up to 2022 Model Line: 911 (992) Equipment: Full bucket seats (M-no. Q1K) Concerns: Threaded joint securing seat beltmount to driver’s seat and passenger’s seat Cause: Due to a process error in the production run, on affected vehicles the screw connection of the belt end installing on the driver’s seat as well as the passenger seatmay not comply with the specifications. If this is the case, the functionality of the screw connection cannot be ensured in the event of an accident and thus loosening of the seat belt attachment cannot be ruled out. Action required: Check the screw connection for the belt end installing on the driver’s seat and passenger seat and replace the seat frame if necessary. Affected Vehicles: Only vehicles assigned to the campaign (see also PCSS Vehicle Information) AfterSales Jan 9, 2023 Page 1 of 9 7 Technical Information Installation Position: Installation position of threaded joint for seat belt mount 1 – Threaded joint for seat belt mount at the left and right (checking seat frame and replacing if necessary) Required parts Parts Info: Part No. Designation – Point of use Quantity PAF009057 Hexagonal fit bolt – Seat belt mount 2 piece(s) Additional required parts if the left seat framemust be replaced: V04015256CA Left seat frame – Driver’s seat for left-hand drive vehicles (I-no. L0L) – Passenger’s seat for right-hand drive vehicles (I-no. L0R) 1 piece(s) PAF009929 Hexagon-head bolt – Belt buckle 1 piece(s) Jan 9, 2023 Page 2 of 9 AfterSales ANB6 ENU 911 ()992 239/22 Technical Information 911 (992) 239/22ENU ANB6 7 9A700748300 External hexalobular screw —Seat mounting 4 piece(s) Additional required parts, if the right seat frame needs to be replaced: V04015256CB Right seat frame – Passenger’s seat for left-hand drive vehicles (M-no. L0L) – Driver’s seat for right-hand drive vehicles (M-no. L0R) 1 piece(s) PAF009929 Hexagon-head bolt – Belt buckle 1 piece(s) 9A700748300 External hexalobular screw —Seat mounting 4 piece(s) Required tools Tools: • Torque wrench, 20-100 Nm (15-74 ftlb.), e.g. VAS 5820 – Torque wrench, 20-100 Nm(15-74 ftlb.) or equivalent Additionally required tools if the seat frame needs to be replaced: • Torque wrench, 2-10 Nm (1.5-7.5 ftlb.), e.g. V.A.G 1783 – Torque wrench, 2-10 Nm(1.5-7.5 ftlb.) or equivalent Checking threaded joint for seat belt mount at the left and right and replacing seat frame if necessary Work Procedure: 1 Check threaded joint for seat belt mount at the left and right (driver seat and passenger seat). 1.1 Open the driver’s and passenger’s door. 1.2 Unscrew and remove threaded joint for seat belt mount on the driver’s seat and passenger seat. 1.3 Check the relevant fastening screw for damage. • Both fastening screws can be unscrewed easily after loosening them. The thread of both fastening screws is clean and shows no signs of damage apart from the usual signs of use: End of action. Screw in and tighten new fastening screw. Then continue with Step 2. Tightening torque 50 Nm (36.9 ftlb.) AfterSales Jan 9, 2023 Page 3 of 9 7 Technical Information • Thread of one or both fastening screws shows signs of damage: The relevant seat framemust be replaced. Photographic documentation is absolutely essential for this and must be attached to the warranty claim. To replace the seat frame, see Workshop Manual ‘Removing and installing front seat frame’ Tightening torque 50 Nm (36.9 ftlb.) 2 Enter the campaign in the Warranty and Maintenance booklet. Warranty processing Information The specified labor times were determined specifically for carrying out this campaign and include all required preliminary and subsequent work. The labor times may differ from the labor times published in the Labor Operation List in PCSS. Scope 1: Checking threaded joint for seat belt mount on left and right Labor time: Checking threaded joint for seat belt mount on left and right Includes: Loosening and securing fastening screw for seat belt mount Labor time: 37 TU Required parts: PAF009057 Hexagonal fit bolt 2 pieces Additional costs: ANB60000001 Transport costs 1 piece * For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an additional part with the designation “Transport costs” and with the amount as per invoice. Please document a copy of the invoice inWWS. Damage Code ANB6 099 000 1 Scope 2: Checking threaded joint for seat belt mount at the left and right and replacing left seat frame Jan 9, 2023 Page 4 of 9 AfterSales ANB6 ENU 911 ()992 239/22 Technical Information 911 (992) 239/22ENU ANB6 7 Labor time: Checking threaded joint for seat beltmount at the left and right and replacing left seat frame Includes: Loosening and securing fastening screw for seat belt mount Labor time: 119 TU Required parts: V04015256CA Left seat frame 1 piece PAF009057 Hexagonal fit bolt 2 pieces PAF009929 Hexagon-head bolt 1 piece 9A700748300 External hexalobular screw 4 pieces Additional costs: ANB60000001 Transport costs 1 piece * For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an additional part with the designation “Transport costs” and with the amount as per invoice. Please document a copy of the invoice inWWS. Damage Code ANB6 099 000 2 Scope 3: Checking threaded joint for seat belt mount at the left and right and replacing right seat frame Labor time: Checking threaded joint for seat beltmount at the left and right and replacing right seat frame Includes: Loosening and securing fastening screw for seat belt mount Labor time: 103 TU Required parts: V04015256CB Right seat frame 1 piece PAF009057 Hexagonal fit bolt 2 pieces PAF009929 Hexagon-head bolt 1 piece AfterSales Jan 9, 2023 Page 5 of 9 7 Technical Information 9A700748300 External hexalobular screw 4 pieces Additional costs: ANB60000001 Transport costs 1 piece * For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an additional part with the designation “Transport costs” and with the amount as per invoice. Please document a copy of the invoice inWWS. Damage Code ANB6 099 000 2 Scope 4: Checking threaded joint for seat belt mount at the left and right and replacing left and right seat frame Labor time: Checking threaded joint for seat beltmount at the left and right and replacing left and right seat frame Includes: Loosening and securing fastening screw for seat belt mount Labor time: 189 TU Required parts: V04015256CA Left seat frame 1 piece V04015256CB Right seat frame 1 piece PAF009057 Hexagonal fit bolt 2 pieces PAF009929 Hexagon-head bolt 2 pieces 9A700748300 External hexalobular screw 8 pieces Additional costs: ANB60000001 Transport costs 1 piece * For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an additional part with the designation “Transport costs” and with the amount as per invoice. Please document a copy of the invoice inWWS. Damage Code ANB6 099 000 2 Jan 9, 2023 Page 6 of 9 AfterSales ANB6 ENU 911 ()992 239/22 Technical Information 911 (992) 239/22ENU ANB6 7 Scope 5: Checking threaded joint for seat belt mount at the left and right and replacing left seat frame Valid for vehicles: • with fire extinguisher (MNo. 6A7 & 6A8) • Right-hand drive (M-no. L0R) Labor time: Checking threaded joint for seat beltmount at the left and right and replacing left seat frame Includes: Loosening and securing fastening screw for seat belt mount Removing and installng fire extinguisher on passenger’s seat Labor time: 139 TU Required parts: V04015256CA Left seat frame 1 piece PAF009057 Hexagonal fit bolt 2 pieces PAF009929 Hexagon-head bolt 1 piece 9A700748300 External hexalobular screw 4 pieces Additional costs: ANB60000001 Transport costs 1 piece * For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an additional part with the designation “Transport costs” and with the amount as per invoice. Please document a copy of the invoice inWWS. Damage Code ANB6 099 000 2 Scope 6: Checking threaded joint for seat belt mount at the left and right and replacing right seat frame Valid for vehicles: • with fire extinguisher (MNo. 6A7 & 6A8) • Left-hand drive (M-no. L0L) AfterSales Jan 9, 2023 Page 7 of 9 7 Technical Information Labor time: Checking threaded joint for seat beltmount at the left and right and replacing right seat frame Includes: Loosening and securing fastening screw for seat belt mount Removing and installing fire extinguisher on passenger’s seat Labor time: 139 TU Required parts: V04015256CB Right seat frame 1 piece PAF009057 Hexagonal fit bolt 2 pieces PAF009929 Hexagon-head bolt 1 piece 9A700748300 External hexalobular screw 4 pieces Additional costs: ANB60000001 Transport costs 1 piece * For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an additional part with the designation “Transport costs” and with the amount as per invoice. Please document a copy of the invoice inWWS. Damage Code ANB6 099 000 2 Scope 7: Checking threaded joint for seat belt mount at the left and right and replacing left and right seat frame • Valid for vehicles with fire extinguisher (M-no. 6A7 and 6A8) Labor time: Checking threaded joint for seat beltmount at the left and right and replacing left and right seat frame Includes: Loosening and securing fastening screw for seat belt mount Removing and installing fire extinguisher on passenger’s seat Labor time: 209 TU Required parts: V04015256CA Left seat frame 1 piece Jan 9, 2023 Page 8 of 9 AfterSales ANB6 ENU 911 ()992 239/22 Technical Information 911 (992) 239/22ENU ANB6 7 V04015256CB Right seat frame 1 piece PAF009057 Hexagonal fit bolt 2 pieces PAF009929 Hexagon-head bolt 2 pieces 9A700748300 External hexalobular screw 8 pieces Additional costs: ANB60000001 Transport costs 1 piece * For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an additional part with the designation “Transport costs” and with the amount as per invoice. Please document a copy of the invoice inWWS. Damage Code ANB6 099 000 2 Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2023 Porsche Cars North America, Inc. AfterSales Jan 9, 2023 Page 9 of 9
**************************************************************************************************************
Technical Information 911 (992) 239/22ENU ANB6 7 ANB6 – Checking Threaded Joint for Seat BeltMount at the Left and Right and Replacing Seat Frame if Necessary (Recall Campaign) Model Line: 911 (992) Model Year: As of 2021 up to 2022 Equipment: Full bucket seats (M-no. Q1K) Concerns: Threaded joint securing seat beltmount to driver’s seat and passenger’s seat Cause: Due to a process error in the production run, on affected vehicles the screw connection of the belt end installing on the driver’s seat as well as the passenger seatmay not comply with the specifications. If this is the case, the functionality of the screw connection cannot be ensured in the event of an accident and thus loosening of the seat belt attachment cannot be ruled out. Action required: Check the screw connection for the belt end installing on the driver’s seat and passenger seat and replace the seat frame if necessary. Please note that as of the time of this publication, only the Check instructions are available. If the seat frames need to be replaced as a result of the check, the vehicle must be grounded at the dealer until such time as the frames are available. Frames are not expected to be available until late January 2023. Affected Vehicles: Only vehicles assigned to the campaign (see also PCSS Vehicle Information) AfterSales Dec 16, 2022 Page 1 of 4 7 Technical Information Installation Position: Installation position of threaded joint for seat belt mount 1 – Threaded joint for seat belt mount at the left and right (checking seat frame) Required parts Parts Info: Part No. Designation – Point of use Quantity PAF009057 Hexagonal fit bolt – Seat belt mount 2 piece(s) Required tools Tool: • Torque wrench, 20-100 Nm (15-74 ftlb.), e.g. VAS 5820 – Torque wrench, 20-100 Nm (15-74 ftlb.) or equivalent Dec 16, 2022 Page 2 of 4 AfterSales ANB6 ENU 911 ()992 239/22 Technical Information 911 (992) 239/22ENU ANB6 7 Checking threaded joint for seat belt mount at the left and right Work Procedure: 1 Check threaded joint for seat belt mount at the left and right (driver seat and passenger seat). 1.1 Open the driver’s and passenger’s door. 1.2 Unscrew and remove threaded joint for seat belt mount on the driver’s seat and passenger seat. 1.3 Check the relevant fastening screw for damage. • Both fastening screws can be unscrewed easily after loosening them. The thread of both fastening screws is clean and shows no signs of damage apart from the usual signs of use: End of action. Screw in and tighten new fastening screw. Then continue with Step 2. Tightening torque 50 Nm (36.9 ftlb.) 2 Enter the campaign in the Warranty and Maintenance booklet. Warranty processing Information The specified labor times were determined specifically for carrying out this campaign and include all required preliminary and subsequent work. The labor times may differ from the labor times published in the Labor Operation List in PCSS. Scope 1: Checking threaded joint for seat belt mount on left and right Labor time: Checking threaded joint for seat belt mount on left and right Includes: Loosening and securing fastening screw for seat belt mount Labor time: 37 TU Required parts: PAF009057 Hexagonal fit bolt 2 pieces Additional costs: ANB60000001 Transport costs 1 piece * For warranty processing, Part No. ANB60000001 can be invoiced in the warranty claim as an additional part with the designation “Transport costs” and with the amount as per invoice. Please document a copy of the invoice inWWS. AfterSales Dec 16, 2022 Page 3 of 4 Damage Code ANB6 099 000 1 7 Technical Information Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2022 Porsche Cars North America, Inc. Dec 16, 2022 Page 4 of 4 AfterSales ANB6 ENU 911 ()992 239/22
**************************************************************************************************************
December 20, 2022 This notice applies to your vehicle: WP0AC2A93~ IMPORTANT SAFETY RECALL (Remedy Notice) Certain 2022 Model Year Porsche 911 GT3 Vehicles Porsche Recall ANB6 / NHTSA ID 22V-803 Dear■■■ : This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Porsche has decided that a defect, which relates to motor vehicle safety, exists in certain 2022 Model Year Porsche 911 GT3 and GT3 T curing Vehicles. Whatistheissue? What should you do? The remedy needed to complete this recall is now available. Please contact any authorized Porsche dealer to schedule an appointment to have this recall performed as soon as possible and to arrange for Porsche-provided alternate transportation, if necessary. Due to an assembly process deviation that has since been corrected, on some of the potentially affected vehicles equipped with optional Full Bucket Seats, the screw attaching the lower seatbelt anchor to the seat frame may not have been tightened to the specification. If the lower anchor screw loosens, in the event of a crash, the seatbelt anchor could detach from the seat, increasing the risk of injury. To find your nearest authorized Porsche dealer, visit: www.porsche.com/ usa What will Porsche do? To help prevent this issue from occurring, Porsche will replace the screws attaching the lower seatbelt anchor to the seat frames and tighten the screws to the specifications. If the thread is damaged, the seat frame will also be replaced. This repair should take approximately 2 hours to complete, however, it may be necessary to make your vehicle available to your dealer for a longer period of time. Your Porsche dealer will arrange for alternate transportation if necessary. What if you are not the owner or operator of this vehicle? If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten days of receipt. If you have changed your address or sold the vehicle, please contact customer support so we can update our records. 1- 10265- Can we assist you further? Please be aware that if you require any assistance in making an appointment to have this recall performed, please call or write: Porsche Cars North America, Inc. Attn: Customer Support One Porsche Drive Atlanta, GA 30354 1-800-PORSCHE customersupport@porsche.com If you still cannot obtain satisfaction, and your dealer or Porsche is unable to remedy the defect without charge or within a reasonable amount of time, you may file a complaint with: Administrator National Highway Traffic Safety Administration 1200 New Jersey Avenue, S.E. Washington, D.C. 20590 Or you may call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to http://www.safercar.gov. We apologize for any inconvenience this matter may cause you. We are taking this action to help ensure your safety and continued satisfaction with your vehicle. Very truly yours, Porsche Cars North America, Inc.
**************************************************************************************************************
1 ANB6 Recall campaign – Checking screw connection for belt end attachment left and right and replace seat frame if necessary ANB6 Recall campaign – Checking screw connection for belt end attachment left and right and replace seat frame if necessary ID Number ANB6 Models 911 GT3 / GT3 Touring (992) Model Years 2022 Number of VINs affected 15 VIN list Attached Issue Description Due to an assembly process deviation that has since been corrected, on some of the potentially affected vehicles equipped with optional Full Bucket Seats, the screw attaching the lower seatbelt anchor to the seat frame may not have been tightened to the specification. What Should Dealers Do? The repair is not available at this time. What will Porsche Do? Vehicles will have the remedy performed once it is available. TI Number TI to be released at a later date Customer letter To be posted at a later date Customer Reactive Statement The safety of anyone travelling in one of our cars is our highest priority. For this reason, we regularly review the quality of our work. In the course of these reviews, it was discovered that in certain model year 2022 911 GT3 cars, one of the screws anchoring the seatbelt harness to the seat frame may not have been tightened to meet the specifications. Only fifteen cars with the optional Full Bucket Seats are potentially affected. No incidents have been reported. Customers will be promptly notified so that Porsche dealers can quickly inspect the affected vehicles. There will be no charge for this. ANB6 Recall campaign – Checking screw connection for belt end attachment left and right and replace seat frame if necessary 2
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-803 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Porsche Cars North America, Inc. Submission Date : NOV 01, 2022 NHTSA Recall No. : 22V-803 Manufacturer Recall No. : ANB6 Manufacturer Information : Manufacturer Name : Porsche Cars North America, Inc. Address : One Porsche Drive Atlanta GA 30354 Company phone : 1-800-767-7243 Population : Number of potentially involved : 15 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Porsche 911 GT3 Vehicle Type : LIGHT VEHICLES Body Style : 2-DOOR Power Train : GAS Descriptive Information : Affected vehicles have been identified through production records. Only certain specific vehicles equipped with Full Bucket Seats are affected. Production Dates : JUL 14, 2021 – MAY 31, 2022 VIN Range 1 : Begin : WP0AC2A90NS268207 End : WP0AC2A9XNS270417 ✔ Not sequential Description of Defect : Description of the Defect : Due to an assembly process deviation that has since been corrected, on some of the potentially affected vehicles equipped with optional Full Bucket Seats, the screw attaching the lower seatbelt anchor to the seat frame may not have been tightened to the specification. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : If the lower anchor screw loosens, in the event of a crash, the seatbelt anchor could detach from the seat, increasing the risk of injury. Description of the Cause : The screw attachment procedure was not performed to specification. . Identification of Any Warning that can Occur : In some cases the belt attachment screw connection may potentially exhibit squeaks, looseness, or rattles. Involved Components : Part 573 Safety Recall Report 22V-803 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Screw connection. Component Description : The screw attaching the lower seatbelt anchor to the seat frame. Component Part Number : WHT009057 Supplier Identification : Component Manufacturer Name : Porsche AG production plant Zuffenhausen Address : NR NR Country : NR Chronology : In late July, 2022, Porsche received a notification of a vehicle with a loose lower seatbelt anchor during postproduction inspection. Subsequently, from August to October 2022, an in-depth field analysis was carried out in order to identify any field issues. No field issues were identified. In parallel, Porsche investigated how many vehicles could have been subject to the same assembly procedure deviation. The investigation of potentially affected vehicles included the review and analysis of stored screw data, which had to be obtained from an external service provider. October 19, 2022, upon review of production records, it was determined that 15 vehicles in U.S. could have been affected by the assembly deviation and would be recalled. No deaths or injuries have been reported. Description of Remedy : Description of Remedy Program : The screws attaching the lower seatbelt anchor to the passenger and driver side Full Bucket seat frames will be replaced and tightened to the specifications. If the thread is damaged, the seat frame will also be replaced. The owner’s letter will not include a statement about customer reimbursement for pre-notification remedies as all of the affected vehicles are still covered under Porsche New Car Limited Warranty. How Remedy Component Differs from Recalled Component : The remedy components will be tightened according to the specifications. Part 573 Safety Recall Report 22V-803 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Identify How/When Recall Condition was Corrected in Production : The process optimization has taken place on April 13th, 2022. Recall Schedule : Description of Recall Schedule : Porsche will notify owners within 60 days. If a remedy is not available after 60 days, an interim letter will be sent at that time. Planned Dealer Notification Date : NOV 09, 2022 – NOV 09, 2022 Planned Owner Notification Date : DEC 23, 2022 – DEC 23, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-803 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Porsche Cars North America, Inc. Submission Date : OCT 25, 2022 NHTSA Recall No. : 22V-803 Manufacturer Recall No. : ANB6 Manufacturer Information : Manufacturer Name : Porsche Cars North America, Inc. Address : One Porsche Drive Atlanta GA 30354 Company phone : 1-800-767-7243 Population : Number of potentially involved : 15 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2022-2022 Porsche 911 GT3 Vehicle Type : LIGHT VEHICLES Body Style : 2-DOOR Power Train : GAS Descriptive Information : Affected vehicles have been identified through production records. Only certain specific vehicles equipped with Full Bucket Seats are affected. Production Dates : JUL 14, 2021 – MAY 31, 2022 VIN Range 1 : Begin : WP0AC2A90NS268207 End : WP0AC2A9XNS270417 ✔ Not sequential Description of Defect : Description of the Defect : Due to an assembly process deviation that has since been corrected, on some of the potentially affected vehicles equipped with optional Full Bucket Seats, the screw attaching the lower seatbelt anchor to the seat frame may not have been tightened to the specification. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : If the lower anchor screw loosens, in the event of a crash, the seatbelt anchor could detach from the seat, increasing the risk of injury. Description of the Cause : The screw attachment procedure was not performed to specification. . Identification of Any Warning that can Occur : In some cases the belt attachment screw connection may potentially exhibit squeaks, looseness, or rattles. Involved Components : Part 573 Safety Recall Report 22V-803 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Screw connection. Component Description : The screw attaching the lower seatbelt anchor to the seat frame. Component Part Number : WHT009057 Supplier Identification : Component Manufacturer Name : Porsche AG production plant Zuffenhausen Address : NR NR Country : NR Chronology : In late July, 2022, Porsche received a notification of a vehicle with a loose lower seatbelt anchor during postproduction inspection. Subsequently, from August to October 2022, an in-depth field analysis was carried out in order to identify any field issues. No field issues were identified. In parallel, Porsche investigated how many vehicles could have been subject to the same assembly procedure deviation. The investigation of potentially affected vehicles included the review and analysis of stored screw data, which had to be obtained from an external service provider. October 19, 2022, upon review of production records, it was determined that 15 vehicles in U.S. could have been affected by the assembly deviation and would be recalled. Description of Remedy : Description of Remedy Program : The screws attaching the lower seatbelt anchor to the passenger and driver side Full Bucket seat frames will be replaced and tightened to the specifications. If the thread is damaged, the seat frame will also be replaced. The owner’s letter will not include a statement about customer reimbursement for pre-notification remedies as all of the affected vehicles are still covered under Porsche New Car Limited Warranty. How Remedy Component Differs from Recalled Component : The remedy components will be tightened according to the specifications. Part 573 Safety Recall Report 22V-803 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Identify How/When Recall Condition was Corrected in Production : The process optimization has taken place on April 13th, 2022. Recall Schedule : Description of Recall Schedule : Porsche will notify owners within 60 days. If a remedy is not available after 60 days, an interim letter will be sent at that time. Planned Dealer Notification Date : NOV 09, 2022 – NOV 09, 2022 Planned Owner Notification Date : DEC 23, 2022 – DEC 23, 2022 * NR – Not Reported
SEOCONTENT-END