“This site contains affiliate links for which OEMDTC may be compensated” |
August 4, 2021 NHTSA CAMPAIGN NUMBER: 21V608000
Seat Belt Locking Retractor Malfunction/FMVSS 208
An unsecured child restraint system can increase the risk of injury during a crash.
NHTSA Campaign Number: 21V608
Manufacturer Porsche Cars North America, Inc.
Components SEAT BELTS
Potential Number of Units Affected 4,924
Summary
Porsche Cars North America, Inc. (Porsche) is recalling certain 2021 911 Carrera Coupe, 911 Carrera S Coupe, 911 Carrera 4 Coupe, 911 Carrera 4S Coupe, 911 Turbo Coupe, 911 Turbo S Coupe, Panamera, Panamera 4 E-Hybrid, Panamera 4S, Panamera GTS, Panamera Turbo S, Taycan, Taycan 4S, Taycan Turbo, and Taycan Turbo S vehicles. The seat belt automatic locking retractors may deactivate early, which can prevent the child restraint system from securing properly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, “Occupant Crash Protection.”
Remedy
Dealers will inspect and replace the seat belt assemblies, as necessary, free of charge. Owner notification letters were mailed October 1, 2021. Owners may contact Porsche customer service at 1-800-767-7243. Porsche’s number for this recall is AMB6.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Porsche has a Recall
Test instructions
AMB6 Recall Campaign –
Check three-point belt and replace if necessary
Panamera(971) – MY: 2021
911 (992) – MY: 2021
AMB6 Recall Campaign – Check three-point belt and replace if necessary
Overview / Topic:
A seat belt assembly supplier reported that seat belt assemblies in the subject vehicles may not meet one of the applicable Federal safety standards. Accordingly, the seat belt assembly must be inspected, and replaced if necessary.
Initial Test Instruction:
Check three-point belt
Installation position:
(1) Three-point belt on the passenger front side (check)
Required parts:
No parts are required for checking the child seat lock function of the three-point belts.
Required tools:
No tools are required for checking the child seat lock function of the three-point belts.
On 911 and Panamera vehicles, only the passenger front side needs to be checked.
- Fasten seatbelt over empty vehicle seat, latch seatbelt into buckle.
- Pull the seatbelt (fabric) all the way out of the seatbelt retractor to activate ALR.
- Slowly retract the seatbelt (fabric) fully back into the seatbelt retractor while the seatbelt remains buckled over empty seat (you will hear a ratcheting sound).
- Pull on the belt steady and uniformly and verify that it is locked and cannot be pulled out of the seatbelt retractor.
- EVALUATION
Is the seatbelt locked so the seatbelt (fabric) cannot be pulled out of seatbelt retractor ?
- Yes: ALR function works properly – go to step 6
- No: ALR is not working properly. The affected three-point belt must be replaced as soon as the required parts are available.
- Unfasten seatbelt and run Step 1 to 5 for 5 consecutive times.
- If seatbelt retractor locks without releasing, 5 times in succession, no further action is required. The vehicle can be handed over to the customer.
The vehicle may only be handed over to the customer after the test outlined in the initial inspection instructions has been completed if all three-point belts to be tested are functioning as prescribed. If the function of the three-point seat belt does not comply with specification, the vehicle must remain blocked and must not be handed over to the customer.
We will inform via PPN update regarding the availability of the final replacement procedure and parts as they become available.
Warranty processing
Scope 1: Check three-point belt
Working time:
Check three-point belt Invoicing: Damage Code AMB6 99 000, Repair Code 1 |
Labor time: 29TU |
Information
The scope regarding the check of the three-point seat belt only has to be invoiced if the three-point seat belt functions according to specification.
The invoicing of this scope in case of an incorrect three-point seat belt function shall take place at a later date in line with the associated Recall Campaign. This campaign will be published as soon as the required parts are fully available.
Test instructions
AMB6 Recall Campaign –
Check three-point belt and replace if necessary
Cayenne (9YA/9YB) – MY: 2021
AMB6 Recall Campaign – Check three-point belt and replace if necessary
Overview / Topic:
A seat belt assembly supplier reported that seat belt assemblies in the subject vehicles may not meet one of the applicable Federal safety standards. Accordingly, the seat belt assembly must be inspected, and replaced if necessary.
Remedial action:
Check three-point belt
Installation position:
(1) Three-point belt on the middle rear seat (check)
Required parts:
No parts are required for checking the child seat lock function of the three-point belts.
Required tools:
No tools are required for checking the child seat lock function of the three-point belts.
On Cayenne vehicles, only the middle rear seat needs to be checked.
- Fasten seatbelt over empty vehicle seat, latch seatbelt into buckle.
- For rear center only; extract 200 – 250 mm lower belt (fabric), fold and fix with your hand (Picture 1).
- Pull seatbelt (fabric) all the way out of the seatbelt retractor to activate ALR.
- Slowly retract the seatbelt (fabric) fully back into the seatbelt retractor while the seatbelt remains buckled over empty seat (you will hear a ratcheting sound).
- Pull on the belt steady and uniformly and verify that it is locked and cannot be pulled out of the seatbelt retractor.
- EVALUATION
Is the seatbelt locked so webbing cannot be pulled out of seatbelt retractor ?
- Yes: ALR function works properly – go to step 6
- No: ALR is not working properly. The affected three-point belt must be replaced as soon as the required parts are available.
- Unfasten seatbelt and run Step 1 to 5 for 5 consecutive times.
- If seatbelt retractor locks without releasing, 5 times in succession, no further action is required. The vehicle can be handed over to the customer.
The vehicle may only be handed over to the customer after the test outlined in the initial inspection instructions has been completed if all three-point belts to be tested are functioning as prescribed. If the function of the three-point seat belt does not comply with specification, the vehicle must remain blocked and must not be handed over to the customer.
We will inform via PPN update regarding the availability of the final replacement procedure and parts as they become available.
Warranty processing
Scope 1: Check three-point belt
Working time:
Check three-point belt Invoicing: Damage Code AMB6 99 000, Repair Code 1 |
Labor time: 29TU |
Information
The scope regarding the check of the three-point seat belt only has to be invoiced if the three-point seat belt functions according to specification.
The invoicing of this scope in case of an incorrect three-point seat belt function shall take place at a later date in line with the associated Recall Campaign. This campaign will be published as soon as the required parts are fully available.
Test instructions
AMB6 Recall Campaign –
Check three-point belt and replace if necessary
Taycan (Y1A) – MY: 2021
AMB6 Recall Campaign – Check three-point belt and replace if necessary
Overview / Topic:
A seat belt assembly supplier reported that seat belt assemblies in the subject vehicles may not meet one of the applicable Federal safety standards. Accordingly, the seat belt assembly must be inspected, and replaced if necessary.
Remedial action:
Check three-point belt
Installation position:
(1) Three-point belt on the front (Passenger side) and rear seats (check)
Required parts:
No parts are required for checking the child seat lock function of the three-point belts.
Required tools:
No tools are required for checking the child seat lock function of the three-point belts.
On Taycan vehicles, the check has to be performed on all three-point belt equipped with ALR (automatic locking retractor). Rear Seats (left, middle and right) and Passenger front seat.
The test instructions are shown on the rear middle seat as an example. The test on the other three-point seat belts (front passenger seat and rear left/right seat) must be carried out in the same way.
- Fasten seatbelt over empty vehicle seat, latch seatbelt into buckle.
- For rear center only; extract 200 – 250 mm lower belt fabric, fold and fix with your hand (right picture).
- Pull seatbelt (fabric) all the way out of the seatbelt retractor to activate ALR.
- Slowly retract the seatbelt (fabric) fully back into the seatbelt retractor while the seatbelt remains buckled over empty seat (you will hear a ratcheting sound).
- Pull on the belt steady and uniformly and verify that it is locked and cannot be pulled out of the seatbelt retractor.
- EVALUATION
Is the seatbelt locked so the seatbelt (fabric) cannot be pulled out of seatbelt retractor ?
- Yes: ALR function works properly – go to step 6
- No: ALR is not working properly. The affected three-point belt must be replaced as soon as the required parts are available.
- Unfasten seatbelt and run Step 1 to 5 for 5 consecutive times.
- If seatbelt retractor locks without releasing, 5 times in succession, on all four seats, no further action is required. The vehicle can be handed over to the customer.
The vehicle may only be handed over to the customer after the test outlined in the initial inspection instructions has been completed if all three-point belts to be tested are functioning as prescribed. If the function of the three-point seat belt does not comply with specification, the vehicle must remain blocked and must not be handed over to the customer.
We will inform via PPN update regarding the availability of the final replacement procedure and parts as they become available.
Warranty processing
Scope 1: Not valid for this vehicle type
Scope 2: Check four three-point belts
Working time:
Check three-point belts Includes: Check 4 three-point seat belts Invoicing: Damage Code AMB6 99 000, Repair Code 1 |
Labor time: 35TU |
Information
The scope regarding the check of the three-point seat belt only has to be invoiced if the three-point seat belt functions according to specification.
The invoicing of this scope in case of an incorrect three-point seat belt function shall take place at a later date in line with the associated Recall Campaign. This campaign will be published as soon as the required parts are fully available.
AMB6 Stop delivery – Inspect seat belt and replace if necessary
IMPORTANT REMINDER
IT IS A VIOLATION OF FEDERAL LAW FOR DEALERS TO DELIVER TO CUSTOMERS NEW VEHICLES IN THEIR INVENTORY AFFECTED BY THIS NOTIFICATION UNTIL THESE VEHICLES ARE REMEDIED. DEALERS SHOULD NOT SELL, LEASE, RENT, OR LOAN ANY NEW OR USED VEHICLES IN DEALER INVENTORY AFFECTED BY THIS NOTIFICATION PRIOR TO REMEDY. DEALERS GROUNDING LEASE RETURNS SHOULD REMEDY ALL AFFECTED GROUNDED VEHICLES.
Update 8/11
The remedy check for affected vehicles is posted below. There are 3 different remedy documents, please choose the correct instructions for the model at your dealer.
Please note – This is only a check to see if the seat belts need to be replaced.
The Stop Delivery can be lifted via a Warranty Claim if the check is performed and the belts do not need to be replaced. If this is the case, Scope 1 can be claimed for Warranty processing of the Cayenne, Panamera, and 992. Scope 2 will need to be claimed for the Taycan.
If the belt is not functioning as designed and needs to be replaced then the Stop Delivery must remain on the vehicle until the belts are replaced.
Overview
A seat belt assembly supplier reported that seat belt assemblies in the subject vehicles may not meet one of the applicable Federal safety standards.
Accordingly, the seat belt assemblies must be inspected, and replaced if necessary.
Model type | 911 (992)
Taycan (Y1A) Panamera (971) Cayenne (9YA/9YB) |
Model year | 2021 |
Number of affected vehicles | 167 |
Vehicle usage
The vehicles may only be driven for loading and unloading purposes in the transport chain.
AMB6 Stop delivery – Inspect seat belt and replace if necessary
Further use is not permitted. Test drives are to be omitted.
Test instructions and remedial measures
Will be communicated once available (Est. Calendar Week 32).
Please inform all relevant dealer staff of this communication immediately.
SEOCONTENT-START
September 29, 2021 This notice applies to your vehicle: WP1 This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Porsche has decided that certain 2021 Model Year Porsche 911, Taycan, Panamera, and Cayenne Vehicles fail to conform to Federal Motor Vehicle Safety Standard number 208, “Occupant Crash Protection”. What is the issue? Within a seat belt assembly installed in the vehicle in one or more of the seats, the automatic locking retractors may deactivate early, which can prevent the child restraint system from securing properly. An unsecured child restraint system can increase the risk of injury during a crash. What should you do? The necessary parts to complete this recall are now available. Please contact any authorized Porsche dealer to schedule an appointment to have this recall performed as soon as possible and to arrange for Porsche-provided alternate transportation, if necessary. To find your nearest authorized Porsche dealer, visit: www.porsche.com/usa This is an important Safety Recall. The remedy will take up to 2 business days to perform; however, depending on the dealer’s work schedule, it may be necessary to make your vehicle available for a longer period of time. What will Porsche do? Porsche is conducting a safety recall to inspect and replace any seat belts found to not meet the Safety standards, free of charge. Certain 2021 Model Year Porsche 911, Taycan, Panamera, and Cayenne Vehicles NHTSA ID 21V-608 IMPORTANT SAFETY RECALL (Remedy Notice) URGENT SAFETY RECALL This is an important Safety Recall. The remedy will be performed FREE OF CHARGE to you. Dear Mr. 1111 , – What if you are not the owner or operator of this vehicle? If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten days of receipt. If you have changed your address or sold the vehicle, please contact customer support so we can update our records. Can we assist you further? Please be aware that if you require any assistance in making an appointment to have this recall performed, please call or write: Porsche Cars North America, Inc. Attn: Customer Support One Porsche Drive Atlanta, GA 30354 1-800-PORSCHE customersupport@porsche.com If you still cannot obtain satisfaction, and your dealer or Porsche is unable to remedy the defect without charge or within a reasonable amount of time, you may file a complaint with: Administrator National Highway Traffic Safety Administration 1200 New Jersey Avenue, S.E. Washington, D.C. 20590 Or you may call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to http:/ /www.safercar.gov. We apologize for any inconvenience this matter may cause you. We are taking this action to help ensure your safety and continued satisfaction with your vehicle. Very truly yours, Porsche Cars North America, Inc.**************************************************************************************************************Technical Information Service 134/21ENU AMB6 6 AMB6 – Checking Three-Point Belt and Replacing it if Necessary (Stop Delivery/Recall Campaign) Model Line: 911 (992) Model Year: As of 2021 up to 2022 Country/Market: USA (C02) Canada (C36) Concerns: Child locking function on front three-point belt (passenger’s side) Information: There is a possibility that the child-seat lock on the three-point belts in the affected vehicles will not always function properly due to a defective locking lever. As a result, the legal requirements for the child-seat lock function of the three-point belts may not be met. Action required: Check front three-point belt (passenger’s side) and replace if necessary. Affected Vehicles: Only vehicles assigned to the campaign (see also PCSS Vehicle Information). Parts required If necessary remove the parts from the corresponding invoicing scope after checking the three-point belt. For invoicing scopes, see Technical Information ‘Warranty processing’ Required tools Information No tools are required for checking the three-point belt. AfterSales Sep 29, 2021 Page 1 of 17 6 AMB6 ENU Seervic 134/21 Technical Information Tools: Information The 911 (992) is equipped with either a lithiumstarter battery (I-no. J2A) or an AGMstarter battery (I-no. J0V, J4K) as standard. This depends on the following: • Country version • Modeltype • Vehicle equipment Lithium starter batteries must only be charged using a suitable battery charger that has a current and voltage-controlled charge map. For further information about the battery chargers to be used, see Workshop Manual ‘270689 Charging battery/vehicle electrical system’. • Battery charger with a current rating of at least 90 A and, if required, also with a current and voltage-controlled chargemap for lithium starter batteries, e.g. VAS 5908 battery charger 90A • 9900 – PIWIS Tester 3 • Torque wrench, 6 – 50 Nm (4.5 – 37 ftlb.), e.g. VAG 1331A Torque wrench, 6-50 Nm (4.5-37 ftlb.) • VAS 6494 – Torque screwdriver, 1.5-3 Nm(1-2 ftlb.) • Assembly wedge (commercially available) Checking three-point belt, front (passenger side) Work Procedure: Checking three-point belt, front (passenger side) Closing three-point belt 1 Insert three-point belt with the seat-belt fastener into the seat-belt buckle and lock it Closing three-point belt. Sep 29, 2021 Page 2 of 17 AfterSales Technical Information Service 134/21ENU AMB6 6 Pulling out belt strap 2 Pull the belt strap out completely Pulling out belt strap in order to activate the child locking function (ALR automatic locking retractor). Retracting belt strap 3 Allow the belt strap to retract slowly, checking whether an audible click can be heard while it retracts Retracting belt strap. Pulling out belt strap and checking belt locking system 4 As soon as the belt strap has retracted, check whether it can be pulled out completely again or is blocked Pulling out belt strap and checking belt locking system. When checking the three-point belt, if you discover that the belt strap does not block, the three-point belt must be replaced. To do this, continue with: • Technical Information ‘270689 Replacing front three-point belt (passenger’s side) (Coupé)’or • Technical Information ‘270689 Replacing front three-point belt (passenger’s side) (Targa)’or • Technical Information ‘270689 Replacing front three-point belt (passenger’s side) (Cabriolet)’ AfterSales Sep 29, 2021 Page 3 of 17 6 Technical Information If the belt strap blocks and an audible click can be heard when the three-point belt retracts: • Repeat steps 1 to 4 four times Information If the child-lock function does not comply with specifications once during the five checks, the three-point belt in question must be replaced. If five tests confirm that the child locking function of the three-point belt works according to specifications, the three-point belt does not have to be replaced. If the three-point belt works according to specifications, the campaignmust be completed as follows: • Enter the campaign in the Warranty and Maintenance booklet • End of remedial action Replacing front three-point belt (passenger’s side) (Coupé) WARNING Incorrect handling of seat-belt pretensioner unit • Triggering of seat-belt pretensioner unit Observe safety regulations for handling seat-belt pretensioner units. WorkshopManual ‘6X00IN Safety regulations for handling airbag and seat-belt pretensioner units’ Observe disposal regulations for seat-belt pretensioner units. Workshop Manual ‘6X00IN Disposal of airbag and seat-belt pretensioner units’ After disconnecting the battery, wait 1minute before disconnecting the seat-belt pretensioner unit. Remove ignition key and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Workshop Manual ‘2X00INWork instructions after disconnecting the battery’ If removed for an extended period, the seat-belt pretensioner unitmust be stored in a safe place. Transport the seat-belt pretensioner unit in such a way that the belt strap can retract safely if it is actuated. Information • The seat-belt pretensioner may only be installed when the ground cable of the vehicle battery is disconnected. • The vehicle battery may only be re-connected after the seat belt has been re-installed. Sep 29, 2021 Page 4 of 17 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Information Dispose of replaced and non-ignited airbag and seat-belt pretensioner units in accordance with local legal requirements and transport regulations. Work Procedure: Preparatory work 1 Remove cover (technical equipment space). Workshop Manual ‘852219 Removing and installing cover (technical equipment space)’ 2 Loosen battery ground strap. Workshop Manual ‘978509 Loosening and securing ground strap for battery’ 3 Remove B-pillar trim panel. Workshop Manual ‘706719 Removing and installing B-pillar trim panel’ 4 Remove inner door sill trim. Workshop Manual ‘680519 Removing and installing the inner door sill trim’ 5 Remove rear belt lock. Workshop Manual ‘692519 Removing and installing rear belt lock’ 6 Remove rear seat cushion. Workshop Manual ‘745719 Removing and installing rear seat cushions’ 7 Remove rear headliner. Workshop Manual ‘708519 Removing and installing rear headliner’ 8 Remove C-pillar trim panel. Workshop Manual ‘706819 Removing and installing C-pillar trim panel’ 9 Remove rear side trim panel. Workshop Manual ‘707519 Removing and installing rear side trim panel’ Replacing front three-point belt (passenger’s side) – Replace front three-point belt (passenger’s side). For instructions see: Workshop Manual ‘69111901 Removing and installing front three-point belt (Coupé)’ and Workshop Manual ‘691155 Replacing front three-point belt’ Work Procedure: Concluding work 1 Install rear side trim panel. Workshop Manual ‘707519 Removing and installing rear side trim panel’ AfterSales Sep 29, 2021 Page 5 of 17 6 Technical Information 2 Install C-pillar trim panel. Workshop Manual ‘706819 Removing and installing C-pillar trim panel’ 3 Install rear headliner. Workshop Manual ‘708519 Removing and installing rear headliner’ 4 Install rear seat cushion. Workshop Manual ‘745719 Removing and installing rear seat cushions’ 5 Install rear belt lock. Workshop Manual ‘692519 Removing and installing rear belt lock’ 6 Install inner door sill trim. Workshop Manual ‘680519 Removing and installing inner door sill trim’ 7 Install B-pillar trim panel. Workshop Manual ‘706719 Removing and installing B-pillar trim panel’ 8 Secure battery ground strap. Workshop Manual ‘978509 Loosening and securing ground strap for battery’ 9 Follow work instructions after disconnecting the battery. Workshop Manual ‘2X00IN Work instructions after disconnecting the battery’ 10 Install cover (technical equipment space). Workshop Manual ‘852219 Removing and installing cover (technical equipment space)’ 11 Enter the campaign in the Warranty and Maintenance booklet. Replacing front three-point belt (passenger’s side) (Cabriolet) WARNING Incorrect handling of seat-belt pretensioner unit • Triggering of seat-belt pretensioner unit Observe safety regulations for handling seat-belt pretensioner units. WorkshopManual ‘6X00IN Safety regulations for handling airbag and seat-belt pretensioner units’ Observe disposal regulations for seat-belt pretensioner units. Workshop Manual ‘6X00IN Disposal of airbag and seat-belt pretensioner units’ After disconnecting the battery, wait 1minute before disconnecting the seat-belt pretensioner unit. Remove ignition key and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Workshop Manual ‘2X00INWork instructions after disconnecting the battery’ Sep 29, 2021 Page 6 of 17 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 If removed for an extended period, the seat-belt pretensioner unitmust be stored in a safe place. Transport the seat-belt pretensioner unit in such a way that the belt strap can retract safely if it is actuated. WARNING Incorrect handling of safety bolts • Danger of injury • Loss of torque Always use new fastening screws and nuts following removal. Carry out a visual inspection of parts used. Observe specified tightening torques. Observe specified tightening sequence. Information Dispose of replaced and non-ignited airbag and seat-belt pretensioner units in accordance with local legal requirements and transport regulations. Information • The seat-belt pretensioner may only be installed when the ground cable of the vehicle battery is disconnected. • The vehicle battery may only be re-connected after the seat belt has been re-installed. Work Procedure: Preparatory work 1 Remove cover (technical equipment space). Workshop Manual ‘852219 Removing and installing cover (technical equipment space)’ 2 Loosen battery ground strap. Workshop Manual ‘978509 Loosening and securing ground strap for battery’ 3 Remove inner door sill trim. Workshop Manual ‘680519 Removing and installing the inner door sill trim’ 4 Remove rear belt lock. Workshop Manual ‘692519 Removing and installing rear belt lock’ 5 Remove rear seat cushion. Workshop Manual ‘745719 Removing and installing rear seat cushions’ AfterSales Sep 29, 2021 Page 7 of 17 6 Technical Information 6 Remove rear side trim panel. Workshop Manual ‘70751915 Removing and installing rear side trim panel’ Work Procedure: Replacing front three-point belt (passenger’s side) – Replace front three-point belt (passenger’s side). For instructions see: Workshop Manual ‘69111915 Removing and installing front three-point belt (Cabrio)’ and Workshop Manual ‘691155 Replacing front three-point belt’ Work Procedure: Concluding work 1 Install rear side trim panel. Workshop Manual ‘70751915 Removing and installing rear side trim panel’ 2 Install rear seat cushion. Workshop Manual ‘745719 Removing and installing rear seat cushions’ 3 Install rear belt lock. Workshop Manual ‘692519 Removing and installing rear belt lock’ 4 Install inner door sill trim. Workshop Manual ‘680519 Removing and installing inner door sill trim’ 5 Install B-pillar trim panel. Workshop Manual ‘706719 Removing and installing B-pillar trim panel’ 6 Secure battery ground strap. Workshop Manual ‘978509 Loosening and securing ground strap for battery’ 7 Follow work instructions after disconnecting the battery. Workshop Manual ‘2X00IN Work instructions after disconnecting the battery’ 8 Install cover (technical equipment space). Workshop Manual ‘852219 Removing and installing cover (technical equipment space)’ 9 Enter the campaign in the Warranty and Maintenance booklet. Replacing front three-point belt (passenger’s side) (Targa) WARNING Incorrect handling of seat-belt pretensioner unit • Triggering of seat-belt pretensioner unit Sep 29, 2021 Page 8 of 17 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Observe safety regulations for handling seat-belt pretensioner units. WorkshopManual ‘6X00IN Safety regulations for handling airbag and seat-belt pretensioner units’ Observe disposal regulations for seat-belt pretensioner units. Workshop Manual ‘6X00IN Disposal of airbag and seat-belt pretensioner units’ After disconnecting the battery, wait 1minute before disconnecting the seat-belt pretensioner unit. Remove ignition key and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Workshop Manual ‘2X00INWork instructions after disconnecting the battery’ If removed for an extended period, the seat-belt pretensioner unitmust be stored in a safe place. Transport the seat-belt pretensioner unit in such a way that the belt strap can retract safely if it is actuated. WARNING Incorrect handling of safety bolts • Danger of injury • Loss of torque Always use new fastening screws and nuts following removal. Carry out a visual inspection of parts used. Observe specified tightening torques. Observe specified tightening sequence. Information Dispose of replaced and non-ignited airbag and seat-belt pretensioner units in accordance with local legal requirements and transport regulations. Information • The seat-belt pretensioner may only be installed when the ground cable of the vehicle battery is disconnected. • The vehicle battery may only be re-connected after the seat belt has been re-installed. Work Procedure: Preparatory work 1 Remove cover (technical equipment space). Workshop Manual ‘852219 Removing and installing cover (technical equipment space)’ 2 Loosen battery ground strap. Workshop Manual ‘978509 Loosening and securing ground strap for battery’ AfterSales Sep 29, 2021 Page 9 of 17 6 Technical Information 3 Remove trim panel for roll-over bar. Workshop Manual ‘70811910 Removing and installing trim panel for roll-over bar’ 4 Remove rear cover. Workshop Manual ‘70531910 Removing and installing rear cover’ 5 Remove belt strap guide. Workshop Manual ‘69261911 Removing and installing belt strap guide – section on “Removing”‘ 6 Remove inner door sill trim. Workshop Manual ‘680519 Removing and installing the inner door sill trim’ 7 Remove rear belt lock. Workshop Manual ‘692519 Removing and installing rear belt lock’ 8 Remove rear seat cushion. Workshop Manual ‘745719 Removing and installing rear seat cushions’ 9 Remove rear side trim panel. Workshop Manual ‘70751910 Removing and installing rear side trim panel’ Work Procedure: Replacing front three-point belt (passenger’s side) – Replace front three-point belt (passenger’s side). For instructions see: Workshop Manual ‘69111911 Removing and installing front three-point belt’ and Workshop Manual ‘691155 Replacing front three-point belt’ Work Procedure: Concluding work 1 Install rear side trim panel. Workshop Manual ‘70751915 Removing and installing rear side trim panel’ 2 Install rear seat cushions. Workshop Manual ‘70751910 Removing and installing rear side trim panel’ 3 Install rear belt lock. Workshop Manual ‘692519 Removing and installing rear belt lock’ 4 Install inner door sill trim. Workshop Manual ‘680519 Removing and installing inner door sill trim’ 5 Install belt strap guide. Workshop Manual ‘69261911 Removing and installing belt strap guide’ Sep 29, 2021 Page 10 of 17 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 6 Install rear cover. Workshop Manual ‘70531910 Removing and installing rear cover’ 7 Install trim panel for roll-over bar. Workshop Manual ‘70811910 Removing and installing trim panel for roll-over bar’ 8 Secure battery ground strap. Workshop Manual ‘978509 Loosening and securing ground strap for battery’ 9 Follow work instructions after disconnecting the battery. Workshop Manual ‘2X00IN Work instructions after disconnecting the battery’ 10 Install cover (technical equipment space). Workshop Manual ‘852219 Removing and installing cover (technical equipment space)’ 11 Enter the campaign in the Warranty and Maintenance booklet. Warranty processing Scope 1: Checking three-point belt Checking three-point belt Includes: Checking three-point belt Labor time: 29 TU Damage Code AMB6 99 000 1 Scope 2-27: Not relevant for this vehicle type. Scope 28: Checking and replacing front three-point belt (passenger’s side) • 911 Coupé Checking and replacing front three-point belt (passenger’s side) Includes: Checking three-point belt Replacing front three-point belt (passenger’s side) – teaching seat-belt pretensioner Labor time: 145 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. ForM-no. 4QR Required part numbers: Designation – Use Qty. AfterSales Sep 29, 2021 Page 11 of 17 6 Technical Information 992857706M A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M 1S1 Three-point seat belt, Racing Yellow – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M N13 Three-point seat belt, Guards Red – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OG6 Three-point seat belt, Bordeaux Red – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OI9 Three-point seat belt, Atacama Beige – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OL8 Three-point seat belt, Chalk – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OS1 Three-point seat belt, Truffle Brown – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OX6 Three-point seat belt, Agave Green – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M U01 Three-point seat belt, sliver – front (passenger’s side) – M-no. 4QR 1 ea. or forM-no. 4QQ Sep 29, 2021 Page 12 of 17 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 992857706J N13 Three-point seat belt, Guards Red – front (passenger’s side) – M-no. 4QQ 1 ea. or 992857706J OI9 Three-point seat belt, Atacama Beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 992857706J U01 Three-point seat belt, sliver – front (passenger’s side) – M-no. 4QQ 1 ea. Additional parts required for replacing the three-point belt 9A700775500 Cylinder screw, M12 x 14 x 18 – belt installing 1 ea. N 91026201 Hexagonal nut, M10 – seat-belt lock (rear) 2 ea. N 98925801 Cylinder screw, 7/16 – 20UNFX42 – Belt installing (rear) 1 ea. 992885731A Bolts – C-pillar trim panel 1 ea. N 98926102 Cylinder screw, 7/16″-20 x 32 – belt reel 1 ea. 99951603201 Hexagon nut, M6 – Belt installing 1 ea. ForM-no. Also use 4QE or 4QQ (REVERSIBLE SEAT-BELT PRETENSIONERS) N 91096701 Internal hexagon round/oval-head screw, M6 x 16 – Belt reel (top) 1 ea. Damage Code AMB6 99 000 2 Scope 29: Checking and replacing front three-point belt (passenger’s side) • 911 Targa AfterSales Sep 29, 2021 Page 13 of 17 6 Technical Information Checking and replacing front three-point belt (passenger’s side) Includes: Checking three-point belt Replacing front three-point belt (passenger’s side) – teaching seat-belt pretensioner Labor time: 157 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. ForM-no. 4QR Required part numbers: Designation – Use Qty. 992857706M A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M 1S1 Three-point seat belt, Racing Yellow – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M N13 Three-point seat belt, Guards Red – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OG6 Three-point seat belt, Bordeaux Red – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OI9 Three-point seat belt, Atacama Beige – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OL8 Three-point seat belt, Chalk – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M OS1 Three-point seat belt, Truffle Brown – front (passenger’s side) – M-no. 4QR 1 ea. or Sep 29, 2021 Page 14 of 17 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 992857706M OX6 Three-point seat belt, Agave Green – front (passenger’s side) – M-no. 4QR 1 ea. or 992857706M U01 Three-point seat belt, sliver – front (passenger’s side) – M-no. 4QR 1 ea. or forM-no. 4QQ 992857706J N13 Three-point seat belt, Guards Red – front (passenger’s side) – M-no. 4QQ 1 ea. or 992857706J OI9 Three-point seat belt, Atacama Beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 992857706J U01 Three-point seat belt, sliver – front (passenger’s side) – M-no. 4QQ 1 ea. Additional parts required for replacing the three-point belt 9A700775500 Cylinder screw, M12 x 14 x 18 – belt installing 1 ea. N 91026201 Hexagonal nut, M10 – seat-belt lock (rear) 2 ea. 992885731A Bolts – Rear side trim panel 1 ea. N 98926102 Cylinder screw, 7/16″-20 x 32 – belt reel 1 ea. 99951603201 Hexagon nut, M6 – Belt installing 1 ea. ForM-no. Also use 4QE or 4QQ (REVERSIBLE SEAT-BELT PRETENSIONERS) N 91096701 Internal hexagon round/oval-head screw, M6 – Belt reel (top) 1 ea. Damage Code AMB6 99 000 2 Scope 30: Checking and replacing front three-point belt (passenger’s side) AfterSales Sep 29, 2021 Page 15 of 17 6 Technical Information • 911 Cabriolet Checking and replacing front three-point belt (passenger’s side) Includes: Checking three-point belt Replacing front three-point belt (passenger’s side) – teaching seat-belt pretensioner Labor time: 120 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. ForM-no. 4QR Required part numbers: Designation – Use Qty. 992857706P A23 Three-point seat belt, black – front (passenger’s side) 1 ea. or 992857706P 1S1 Three-point seat belt, Racing Yellow – front (passenger’s side) 1 ea. or 992857706P N13 Three-point seat belt, Guards Red – front (passenger’s side) 1 ea. or 992857706P OG6 Three-point seat belt, Bordeaux Red – front (passenger’s side) 1 ea. or 992857706P OI9 Three-point seat belt, Atacama Beige – front (passenger’s side) 1 ea. or 992857706P OL8 Three-point seat belt, Chalk – front (passenger’s side) 1 ea. or 992857706P OS1 Three-point seat belt, Truffle Brown – front (passenger’s side) 1 ea. or 992857706P OX6 Three-point seat belt, Agave Green – front (passenger’s side) 1 ea. Additional parts required for replacing the three-point belt 9A700775500 Cylinder screw, M12 x 14 x 18 – belt installing 1 ea. Sep 29, 2021 Page 16 of 17 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 N 91026201 Hexagonal nut, M10 – seat-belt lock (rear) 2 ea. 992885731A Bolts – Rear side trim panel 1 ea. N 98926102 Cylinder screw, 7/16″-20 x 32 – belt reel 1 ea. ForM-no. Also use 4QE or 4QQ (REVERSIBLE SEAT-BELT PRETENSIONERS) N 91096701 Internal hexagon round/oval-head screw, M6 x 16 – Belt reel (top) 1 ea. Damage Code AMB6 99 000 2 Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2021 Porsche Cars North America, Inc. AfterSales Sep 29, 2021 Page 17 of 17**************************************************************************************************************Technical Information Service 134/21ENU AMB6 6 AMB6 – Checking Three-Point Belt and Replacing it if Necessary (Stop Delivery/Recall Campaign) Model Line: Taycan (Y1A) Model Year: As of 2021 up to 2022 Country/Market: USA (C02) Canada (C36) Concerns: Child locking function on three-point belt Information: There is a possibility that the child-seat lock on the three-point belts in the affected vehicles will not always function properly due to a defective locking lever. As a result, the legal requirements for the child-seat lock function of the three-point belts may not be met. Action required: Check the three-point belts affected and replace them if necessary. Information Every vehicle affected by this campaign has been assigned multiple scopes. • 1 scope for testing • 1 – 8 other scopes for replacing the three-point belts, depending on the test result Based on production data, it is clear at which position a potentially faulty three-point belt was installed in each vehicle. To determine which three-point belt(s) must be checked, use the PCSS Vehicle Information to determine the scope of the test required for the vehicle. Then check the three-point belt(s) affected. For instructions see: Technical Information ‘Checking three-point belt’ Depending on the result of the test, the relevant scope must then be selected to carry out the remedial action and the related warranty processing. Affected Vehicles: Only vehicles assigned to the campaign (see also PCSS Vehicle Information). Parts required If necessary remove the parts from the corresponding invoicing scope after checking the three-point belt(s). For invoicing scopes, see Technical Information ‘Warranty processing’ AfterSales Sep 29, 2021 Page 1 of 38 6 Technical Information Required tools Information The Taycan (Y1A) is equipped as standard with a lithium starter battery. Lithium starter batteries must only be charged using a suitable battery charger that has a current and voltage-controlled charge map. For further information about the battery chargers to be used, see Workshop Manual ‘270689 Charging battery/vehicle electrical system’. Information No tools are required for checking the three-point belts. Tools: • Battery charger with a current rating of at least 90 A, and also with a current and voltage-controlled chargemap for lithium starter batteries, e.g. VAS 5908 battery charger 90 A. • 9900 – PIWIS Tester 3 • Torque wrench, 2 – 10 Nm (1.5 – 7.5 ftlb.), e.g. VAG 1783 Torque wrench, 2-10 Nm (1.5-7.5 ftlb.) • Torque wrench, 6 – 50 Nm (4.5 – 37 ftlb.), e.g. VAG 1331A Torque wrench, 6-50 Nm (4.5-37 ftlb.) • Plastic wedge (commercially available) Checking three-point belt Work Procedure: Checking three-point belt Depending on the test scope assigned to the vehicle, check the appropriate three-point belt/three-point belts. Information The test procedure is shown using the rear center seat as an example. The three-point belts for the rear right, rear left and front (passenger’s side) seats must be checked in the same way. Sep 29, 2021 Page 2 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Closing three-point belt 1 Insert three-point belt with the seat-belt fastener into the seat-belt buckle and lock it Closing three-point belt. Information To check the three-point belts for the rear right, rear left and front (passenger’s side) seats, continue with Step 3. Holding belt strap 2 Pull belt strap about 200 mm – 250 mm/ 7.87 in— 9.84 in out of the belt installling and hold in place with your hand Holding belt strap -Left picture-. Pulling out belt strap 3 While holding the belt strap in place with your hand Holding belt strap -Right picture- (only for rear center three-point belt), pull the belt strap out fully Pulling out belt strap in order to activate the child locking function (ALR automatic locking retractor). AfterSales Sep 29, 2021 Page 3 of 38 6 Technical Information Retracting belt strap 4 Allow the belt strap to retract slowly, checking whether an audible click can be heard while it retracts Retracting belt strap. Keep holding the belt strap with your hand (only for rear center three-point belt). Pulling out belt strap and checking belt locking system 5 As soon as the belt strap has retracted, check whether it can be pulled out again or is blocked Pulling out belt strap and checking belt locking system. When checking the three-point belt(s), if you discover that the belt strap does not lock, the three-point belt(s) affected must be replaced. To do this, continue with: • Technical Information ‘270689 Replacing front (passenger’s side) three-point belt’ and/or • Technical Information ‘270689 Replacing rear left / right three-point belt’ and/or • Technical Information ‘270689 Replacing rear centre three-point belt’ If the belt strap blocks and an audible click can be heard when the three-point belt retracts: • Repeat steps 1 to 5 four times Information The check must be performed five times on all affected three-point belts. Information If the child-lock function does not comply with specifications once during the five checks, the three-point belt in question must be replaced. If five tests confirm that the child locking function of the three-point belt(s) works according to specifications, the three-point belt(s) do not have to be replaced. Sep 29, 2021 Page 4 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 If all three-point belts to be checked work according to specifications, the campaign can be completed as follows: • Enter the campaign in the Warranty and Maintenance booklet • End of remedial action Replacing front three-point belt (passenger’s side) WARNING Incorrect handling of seat-belt pretensioner unit • Triggering of seat-belt pretensioner unit Observe safety regulations for handling seat-belt pretensioner units. WorkshopManual ‘6X00IN Handling and replacing airbag and seat-belt pretensioner units’ Observe disposal regulations for seat-belt pretensioner units. Workshop Manual ‘6X00IN Disposal of airbag and seat-belt pretensioner units’ After disconnecting the battery, wait 1minute before disconnecting the seat-belt pretensioner unit. Set aside the remote control and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Workshop Manual ‘978519 Removing and installing ground strap for battery’ If removed for an extended period, the seat-belt pretensioner unitmust be stored in a safe place. Transport the seat-belt pretensioner unit in such a way that the belt strap can retract safely if it is actuated. Information Dispose of replaced and non-ignited airbag and seat-belt pretensioner units in accordance with local legal requirements and transport regulations. Work Procedure: Preparatory work 1 Remove B-pillar trim panel (lower part). Workshop Manual ‘706719 Removing and installing B-pillar trim panel (lower part)’ 2 Remove the B-pillar trim panel (upper part). Workshop Manual ‘70671901 Removing and installing the B-pillar trim panel (upper part)’ 3 Remove rear seat. Workshop Manual ‘724819 Removing and installing rear seat’ 4 Remove (lower part of) C-pillar trim panel. Workshop Manual ‘706819 Removing and installing C-pillar trim panel (lower part)’ AfterSales Sep 29, 2021 Page 5 of 38 6 Technical Information 5 Remove (rear) inner door sill trim. Workshop Manual ‘680519 Removing and installing (rear) inner door sill trim’ 6 Remove dashboard trim panel. Workshop Manual ‘701619 Removing and installing dashboard trim panel’ 7 Remove front side-section trim panel. Workshop Manual ‘702419 Removing and installing front side-section trim panel’ 8 Remove (front) inner door sill trim. Workshop Manual ‘68051901 Removing and installing (front) inner door sill trim’ Work Procedure: Replacing three-point belt – Replace front three-point belt (passenger’s side). For instructions see: Workshop Manual ‘691119 Removing and installing front three-point belt’ and Workshop Manual ‘691155 Replacing front three-point belt’ Work Procedure: Concluding work 1 Install (front) inner door sill trim. Workshop Manual ‘68051901 Removing and installing (front) inner door sill trim’ 2 Install front side-section trim panel. Workshop Manual ‘702419 Removing and installing front side-section trim panel’ 3 Install (rear) inner door sill trim. Workshop Manual ‘680519 Removing and installing (rear) inner door sill trim’ 4 Install dashboard trim panel. Workshop Manual ‘701619 Removing and installing dashboard trim panel’ Information Unless another three-point belt has to be replaced, continue with Step 5. If one or more rear three-point belts also have to be replaced, continue directly with: • Technical Information ‘701619 Replacing rear left / right three-point belt’ or • Technical Information ‘701619 Replacing rear centre three-point belt’ 5 Install (lower part of) C-pillar trim panel. Workshop Manual ‘706819 Removing and installing C-pillar trim panel (lower part)’ Sep 29, 2021 Page 6 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 6 Install rear seat. Workshop Manual ‘724819 Removing and installing rear seat’ 7 Install the B-pillar trim panel (upper part). Workshop Manual ‘70671901 Removing and installing the B-pillar trim panel (upper part)’ 8 Install B-pillar trim panel (lower part). Workshop Manual ‘706719 Removing and installing B-pillar trim panel (lower part)’ 9 Enter the campaign in the Warranty and Maintenance booklet. Replacing rear left / right three-point belt WARNING Incorrect handling of seat-belt pretensioner unit • Triggering of seat-belt pretensioner unit Observe safety regulations for handling seat-belt pretensioner units. WorkshopManual ‘6X00IN Handling and replacing airbag and seat-belt pretensioner units’ Observe disposal regulations for seat-belt pretensioner units. Workshop Manual ‘6X00IN Disposal of airbag and seat-belt pretensioner units’ After disconnecting the battery, wait 1minute before disconnecting the seat-belt pretensioner unit. Set aside the remote control and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Workshop Manual ‘978519 Removing and installing ground strap for battery’ If removed for an extended period, the seat-belt pretensioner unitmust be stored in a safe place. Transport the seat-belt pretensioner unit in such a way that the belt strap can retract safely if it is actuated. Information Dispose of replaced and non-ignited airbag and seat-belt pretensioner units in accordance with local legal requirements and transport regulations. Work Procedure: Preparatory work: 1 Remove rear seat. Workshop Manual ‘724819 Removing and installing rear seat’ 2 Remove (lower part of) C-pillar trim panel. Workshop Manual ‘706819 Removing and installing C-pillar trim panel (lower part)’ AfterSales Sep 29, 2021 Page 7 of 38 6 Technical Information Work Procedure: Replacing rear left / right three-point belt – Replace rear left / right three-point belt. For instructions see: Workshop Manual ‘691219 Removing and installing rear three-point belt’ Work Procedure: Concluding work Information Unless another three-point belt has to be replaced, continue with Step 1. If one or more rear three-point belts or the front three-point belt (passenger’s side) also has to be replaced, continue directly with: • Technical Information ‘691219 Replacing front three-point belt (passenger’s side)’ or • Technical Information ‘691219 Replacing rear centre three-point belt’ 1 Install (lower part of) C-pillar trim panel. Workshop Manual ‘706819 Removing and installing C-pillar trim panel (lower part)’ 2 Install rear seat. Workshop Manual ‘724819 Removing and installing rear seat’ 3 Enter the campaign in the Warranty and Maintenance booklet. Replacing rear center three-point belt WARNING Incorrect handling of seat-belt pretensioner unit • Triggering of seat-belt pretensioner unit Observe safety regulations for handling seat-belt pretensioner units. WorkshopManual ‘6X00IN Handling and replacing airbag and seat-belt pretensioner units’ Observe disposal regulations for seat-belt pretensioner units. Workshop Manual ‘6X00IN Disposal of airbag and seat-belt pretensioner units’ After disconnecting the battery, wait 1minute before disconnecting the seat-belt pretensioner unit. Set aside the remote control and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Workshop Manual ‘978519 Removing and installing ground strap for battery’ If removed for an extended period, the seat-belt pretensioner unitmust be stored in a safe place. Transport the seat-belt pretensioner unit in such a way that the belt strap can retract safely if it is actuated. Sep 29, 2021 Page 8 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Information Dispose of replaced and non-ignited airbag and seat-belt pretensioner units in accordance with local legal requirements and transport regulations. Work Procedure: Preparatory work: 1 Disconnect ground strap for 12-volt vehicle electrical system battery. For instructions see: Workshop Manual ‘978519 Removing and installing ground strap for battery’ 2 Remove rear seat. Workshop Manual ‘724819 Removing and installing rear seat’ 3 Remove side cushion at the left and right. Workshop Manual ‘724919 Removing and installing side cushion’ 4 Remove rear backrest on 2/3-split folding rear seat. Workshop Manual ‘724719 Removing and installing rear backrest’ Information The rear backrest mount Workshop Manual ‘726719 Removing and installing rear backrest mount’ does not have to be removed. 5 Remove rear-backrest lock. Workshop Manual ‘726819 Removing and installing rear-backrest lock’ 6 Loosen padding for rear backrest to the extent necessary to allow the three-point belt to be removed. This does not require removal of the headrest. For instructions see: Workshop Manual ‘745219 Removing and installing padding for rear backrest’ Work Procedure: Replacing rear center three-point belt – Replace rear center three-point belt. For instructions see: Workshop Manual ‘691219 Removing and installing rear three-point belt’ Work Procedure: Concluding work 1 Install padding for rear backrest. Workshop Manual ‘745219 Removing and installing padding for rear backrest’ 2 Install rear-backrest lock. Workshop Manual ‘726819 Removing and installing rear-backrest lock’ AfterSales Sep 29, 2021 Page 9 of 38 6 Technical Information 3 Install rear backrest on 2/3-split folding rear seat. Workshop Manual ‘724719 Removing and installing rear backrest’ 4 Install side cushion at the left and right. Workshop Manual ‘724919 Removing and installing side cushion’ Information Unless another three-point belt has to be replaced, continue with Step 5. If one or more rear three-point belts or the front three-point belt (passenger’s side) also has to be replaced, continue directly with: • Technical Information ‘724919 Replacing front three-point belt (passenger’s side)’ or • Technical Information ‘724919 Replacing rear left / right three-point belt’ 5 Install rear seat. Workshop Manual ‘724819 Removing and installing rear seat’ 6 Connect ground strap for 12-volt vehicle electrical system battery. For instructions see: Workshop Manual ‘978519 Removing and installing ground strap for battery’ 7 Follow work instructions after disconnecting the 12-volt vehicle electrical system battery. Workshop Manual ‘2X00IN Work instructions after disconnecting the 12-volt battery’ 8 Enter the campaign in the Warranty and Maintenance booklet. Warranty processing Scope 1: Not relevant for this vehicle type. Scope 2: Checking three-point belt in front (passenger side), rear left, rear right and rear center Checking three-point belts Includes: Checking 4 three-point belts Labor time: 35 TU Damage Code AMB6 99 000 1 Sep 29, 2021 Page 10 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Checking three-point belt Includes: Checking 1 three-point belt Labor time: 29 TU Damage Code AMB6 99 000 1 Scope 4: Check rear left three-point belt Checking three-point belt Includes: Checking 1 three-point belt Labor time: 29 TU Damage Code AMB6 99 000 1 Scope 5: Checking rear right three-point belt Checking three-point belt Includes: Checking 1 three-point belt Labor time: 29 TU Damage Code AMB6 99 000 1 Scope 6: Checking three-point belt on rear left and rear center Checking three-point belts Includes: Checking 2 three-point belts Labor time: 31 TU Damage Code AMB6 99 000 1 Scope 7: Checking three-point belt on rear left and rear right Checking three-point belts Includes: Checking 2 three-point belts Labor time: 31 TU Damage Code AMB6 99 000 1 AfterSales Sep 29, 2021 Page 11 of 38 Scope 3: Checking three-point belt, front (passenger side) 6 Technical Information Checking three-point belts Includes: Checking 2 three-point belts Labor time: 31 TU Damage Code AMB6 99 000 1 Scope 9: Checking three-point belt in front (passenger’s side) and rear right Checking three-point belts Includes: Checking 2 three-point belts Labor time: 31 TU Damage Code AMB6 99 000 1 Scope 10: Checking three-point belt at rear left, rear right and rear center Checking three-point belts Includes: Checking 3 three-point belts Labor time: 33 TU Damage Code AMB6 99 000 1 Scope 11: Checking three-point belt in front (passenger side), rear left and rear right Checking three-point belts Includes: Checking 3 three-point belts Labor time: 33 TU Damage Code AMB6 99 000 1 Scope 12: Checking three-point belt in front (passenger side), rear left and rear center Checking three-point belts Includes: Checking 3 three-point belts Labor time: 33 TU Damage Code AMB6 99 000 1 Sep 29, 2021 Page 12 of 38 AfterSales AMB6 ENU Seervic 134/21 Scope 8: Checking three-point belt in front (passenger’s side) and rear left Technical Information Service 134/21ENU AMB6 6 Checking and replacing rear left three-point belt Includes: Checking three-point belt Replacing rear left three-point belt Labor time: 67 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation – Use Qty. 9J1857805J A23 Three-point seat belt, black – rear left 1 ea. or 9J1857805J OG6 Three-point seat belt in bordeaux red – rear left 1 ea. or 9J1857805J OH5 Three-point seat belt, chalk beige – rear left 1 ea. or 9J1857805J OI9 Three-point seat belt, atacama beige – rear left 1 ea. or 9J1857805J OL8 Three-point seat belt, chalk – rear left 1 ea. or 9J1857805J OS1 Three-point seat belt, truffle brown – rear left 1 ea. or 9J1857805J OU6 Three-point seat belt, slate grey – rear left 1 ea. or 9J1857805J OW4 Three-point seat belt, blackberry rear left 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling – belt reel 2 ea. Damage Code AMB6 99 000, Repair Code 2 AfterSales Sep 29, 2021 Page 13 of 38 Scope 13: Checking and replacing rear left three-point belt 6 Technical Information Scope 14: Checking and replacing rear center three-point belt Checking and replacing rear center three-point belt Includes: Checking three-point belt Replacing rear center three-point belt Labor time: 118 TU Required part numbers: Designation Qty. 9J1857807E A23 Three-point seat belt, black – rear center 1 ea. N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling – belt reel 2 ea. Damage Code AMB6 99 000, Repair Code 2 Scope 15: Checking and replacing rear right three-point belt Checking and replacing rear right three-point belt Includes: Checking three-point belt Replacing rear right three-point belt Labor time: 67 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857806J A23 Three-point seat belt, black – rear right 1 ea. or 9J1857806J OG6 Three-point seat belt in bordeaux red – rear right 1 ea. or 9J1857806J OH7 Three-point seat belt, graphite blue – rear right 1 ea. or 9J1857806J OL8 Three-point seat belt, chalk – rear right 1 ea. or 9J1857806J OU6 Three-point seat belt, slate grey – rear right 1 ea. Sep 29, 2021 Page 14 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling – belt reel 2 ea. Damage Code AMB6 99 000, Repair Code 2 Scope 16: Checking and replacing front three-point belt (passenger’s side) Checking and replacing front three-point belt (passenger’s side) Includes: Checking three-point belt Replacing front three-point belt (passenger’s side) – teaching seat-belt pretensioner Labor time: 146 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857706J A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OH5 Three-point seat belt, chalk beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OL8 Three-point seat belt, chalk – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OO3 Three-point seat belt, meranti brown – front (passenger’s side) – M-no. 4QQ 1 ea. or AfterSales Sep 29, 2021 Page 15 of 38 6 Technical Information 9J1857706J OS1 Three-point seat belt, truffle brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OU6 Three-point seat belt, slate gray – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OW4 Three-point seat belt, blackberry – front (passenger’s side) – M-no. 4QQ 1 ea. or with M-no. 4QR 9J1857706G A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 9J1857706G OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QR 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling (rear) – belt reel (front) 2 ea. N 90910102 Lens-type screw, M5 x 18 – T-hook 1 ea. N 91074201 Internal hexagon round-head bolt, M5 x 16 – belt deflector 1 ea. PAF912806 Internal serration screw – belt installling 1 ea. Damage Code AMB6 99 000, Repair Code 2 Sep 29, 2021 Page 16 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Checking rear left and rear center three-point belt Includes: Checking three-point belts Replacing rear left and rear center three-point belt Labor time: 148 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857805J A23 Three-point seat belt, black – rear left 1 ea. or 9J1857805J OG6 Three-point seat belt in bordeaux red – rear left 1 ea. or 9J1857805J OH5 Three-point seat belt, chalk beige – rear left 1 ea. or 9J1857805J OI9 Three-point seat belt, atacama beige – rear left 1 ea. or 9J1857805J OL8 Three-point seat belt, chalk – rear left 1 ea. or 9J1857805J OS1 Three-point seat belt, truffle brown – rear left 1 ea. or 9J1857805J OU6 Three-point seat belt, slate grey – rear left 1 ea. or 9J1857805J OW4 Three-point seat belt, blackberry rear left 1 ea. and 9J1857807E A23 Three-point seat belt, black – rear center 1 ea. Additional parts required for replacing the three-point belt AfterSales Sep 29, 2021 Page 17 of 38 Scope 17: Checking and replacing rear left and rear center three-point belt 6 Technical Information N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt reel – belt installling 4 ea. Damage Code AMB6 99 000, Repair Code 2 Scope 18: Checking and replacing rear right and rear center three-point belt Checking rear right and rear center three-point belt Includes: Checking three-point belts Replacing rear right and rear center three-point belt Labor time: 148 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857806J A23 Three-point seat belt, black – rear right 1 ea. or 9J1857806J OG6 Three-point seat belt in bordeaux red – rear right 1 ea. or 9J1857806J OH7 Three-point seat belt, graphite blue – rear right 1 ea. or 9J1857806J OL8 Three-point seat belt, chalk – rear right 1 ea. or 9J1857806J OU6 Three-point seat belt, slate grey – rear right 1 ea. and 9J1857807E A23 Three-point seat belt, black – rear center 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt reel – belt installling 4 ea. Sep 29, 2021 Page 18 of 38 AfterSales AMB6 ENU Seervic 134/21 Damage Code AMB6 99 000, Repair Code 2 Technical Information Service 134/21ENU AMB6 6 Scope 19: Checking and replacing rear left and rear right three-point belt Checking rear left and rear right three-point belt Includes: Checking three-point belts Replacing rear left and rear right three-point belt Labor time: 89 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857806J A23 Three-point seat belt, black – rear right 1 ea. or 9J1857806J OG6 Three-point seat belt in bordeaux red – rear right 1 ea. or 9J1857806J OH7 Three-point seat belt, graphite blue – rear right 1 ea. or 9J1857806J OL8 Three-point seat belt, chalk – rear right 1 ea. or 9J1857806J OU6 Three-point seat belt, slate grey – rear right 1 ea. and 9J1857805J A23 Three-point seat belt, black – rear left 1 ea. or 9J1857805J OG6 Three-point seat belt in bordeaux red – rear left 1 ea. or 9J1857805J OH5 Three-point seat belt, chalk beige – rear left 1 ea. or AfterSales Sep 29, 2021 Page 19 of 38 6 Technical Information 9J1857805J OI9 Three-point seat belt, atacama beige – rear left 1 ea. or 9J1857805J OL8 Three-point seat belt, chalk – rear left 1 ea. or 9J1857805J OS1 Three-point seat belt, truffle brown – rear left 1 ea. or 9J1857805J OU6 Three-point seat belt, slate grey – rear left 1 ea. or 9J1857805J OW4 – Three-point seat belt, blackberry – rear left 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt reel – belt installling 4 ea. Damage Code AMB6 99 000, Repair Code 2 Scope 20: Checking and replacing three-point belt in front (passenger’s side) and rear left Checking and replacing three-point belt in front (passenger’s side) and rear left Includes: Checking three-point belt Replacing three-point belt in front (passenger’s side) and rear left Teaching seat-belt pretensioner Labor time: 169 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857706J A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QQ 1 ea. or Sep 29, 2021 Page 20 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 9J1857706J OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OH5 Three-point seat belt, chalk beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OL8 Three-point seat belt, chalk – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OO3 Three-point seat belt, meranti brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OS1 Three-point seat belt, truffle brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OU6 Three-point seat belt, slate gray – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OW4 Three-point seat belt, blackberry – front (passenger’s side) – M-no. 4QQ 1 ea. or with M-no. 4QR 9J1857706G A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 9J1857706G OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QR 1 ea. and 9J1857805J A23 Three-point seat belt, black – rear left 1 ea. AfterSales Sep 29, 2021 Page 21 of 38 6 Technical Information or 9J1857805J OG6 Three-point seat belt in bordeaux red – rear left 1 ea. or 9J1857805J OH5 Three-point seat belt, chalk beige – rear left 1 ea. or 9J1857805J OI9 Three-point seat belt, atacama beige – rear left 1 ea. or 9J1857805J OL8 Three-point seat belt, chalk – rear left 1 ea. or 9J1857805J OS1 Three-point seat belt, truffle brown – rear left 1 ea. or 9J1857805J OU6 Three-point seat belt, slate grey – rear left 1 ea. or 9J1857805J OW4 – Three-point seat belt, blackberry – rear left 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling (rear) – belt reel (front / rear) 4 ea. N 90910102 Lens-type screw, M5 x 18 – T-hook 1 ea. N 91074201 Internal hexagon round-head bolt, M5 x 16 – belt deflector 1 ea. PAF912806 Internal serration screw – belt installling 1 ea. Damage Code AMB6 99 000, Repair Code 2 Sep 29, 2021 Page 22 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Checking and replacing three-point belt in front (passenger’s side) and rear right Includes: Checking three-point belt Replacing three-point belt in front (passenger’s side) and rear right Teaching seat-belt pretensioner Labor time: 158 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857706J A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OH5 Three-point seat belt, chalk beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OL8 Three-point seat belt, chalk – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OO3 Three-point seat belt, meranti brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OS1 Three-point seat belt, truffle brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OU6 Three-point seat belt, slate gray – front (passenger’s side) – M-no. 4QQ 1 ea. or AfterSales Sep 29, 2021 Page 23 of 38 Scope 21: Checking and replacing three-point belt in front (passenger’s side) and rear right 6 Technical Information 9J1857706J OW4 Three-point seat belt, blackberry – front (passenger’s side) – M-no. 4QQ 1 ea. or forM-no. 4QR 9J1857706G A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 9J1857706G OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QR 1 ea. and 9J1857806J A23 Three-point seat belt, black – rear right 1 ea. or 9J1857806J OG6 Three-point seat belt in bordeaux red – rear right 1 ea. or 9J1857806J OH7 Three-point seat belt, graphite blue – rear right 1 ea. or 9J1857806J OL8 Three-point seat belt, chalk – rear right 1 ea. or 9J1857806J OU6 Three-point seat belt, slate grey – rear right 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling (rear) – belt reel (front / rear) 3 ea. N 90910102 Lens-type screw, M5 x 18 – T-hook 1 ea. N 91074201 Internal hexagon round-head bolt, M5 x 16 – belt deflector 1 ea. PAF912806 Internal serration screw – belt installling 1 ea. Sep 29, 2021 Page 24 of 38 AfterSales AMB6 ENU Seervic 134/21 Damage Code AMB6 99 000, Repair Code 2 Technical Information Service 134/21ENU AMB6 6 Scope 22: Checking and replacing three-point belt in front (passenger’s side) and rear center Checking and replacing three-point belt in front (passenger’s side) and rear center Includes: Checking three-point belt Replacing three-point belt in front (passenger’s side) and rear center Teaching seat-belt pretensioner Labor time: 222 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857706J A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OH5 Three-point seat belt, chalk beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OL8 Three-point seat belt, chalk – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OO3 Three-point seat belt, meranti brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OS1 Three-point seat belt, truffle brown – front (passenger’s side) – M-no. 4QQ 1 ea. or AfterSales Sep 29, 2021 Page 25 of 38 6 Technical Information 9J1857706J OU6 Three-point seat belt, slate gray – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OW4 Three-point seat belt, blackberry – front (passenger’s side) – M-no. 4QQ 1 ea. or forM-no. 4QR 9J1857706G A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 9J1857706G OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QR 1 ea. and 9J1857807E A23 Three-point seat belt, black – rear center 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling (rear) – belt reel (front / rear) 4 ea. N 90910102 Lens-type screw, M5 x 18 – T-hook 1 ea. N 91074201 Internal hexagon round-head bolt, M5 x 16 – belt deflector 1 ea. PAF912806 Internal serration screw – belt installling 1 ea. Damage Code AMB6 99 000, Repair Code 2 Sep 29, 2021 Page 26 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Checking rear left, rear right and rear center three-point belt Includes: Checking three-point belts Replacing rear left, rear right and rear center three-point belt Labor time: 171 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857806J A23 Three-point seat belt, black – rear right 1 ea. or 9J1857806J OG6 Three-point seat belt in bordeaux red – rear right 1 ea. or 9J1857806J OH7 Three-point seat belt, graphite blue – rear right 1 ea. or 9J1857806J OL8 Three-point seat belt, chalk – rear right 1 ea. or 9J1857806J OU6 Three-point seat belt, slate grey – rear right 1 ea. and 9J1857805J A23 Three-point seat belt, black – rear left 1 ea. or 9J1857805J OG6 Three-point seat belt in bordeaux red – rear left 1 ea. or 9J1857805J OH5 Three-point seat belt, chalk beige – rear left 1 ea. or 9J1857805J OI9 Three-point seat belt, atacama beige – rear left 1 ea. or 9J1857805J OL8 Three-point seat belt, chalk – rear left 1 ea. AfterSales Sep 29, 2021 Page 27 of 38 Scope 23: Checking and replacing rear left, rear right and rear center three-point belt 6 Technical Information or 9J1857805J OS1 Three-point seat belt, truffle brown – rear left 1 ea. or 9J1857805J OU6 Three-point seat belt, slate grey – rear left 1 ea. or 9J1857805J OW4 – Three-point seat belt, blackberry – rear left 1 ea. and 9J1857807E A23 Three-point seat belt, black – rear center 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling – belt reel 6 ea. Damage Code AMB6 99 000, Repair Code 2 Scope 24: Checking and replacing three-point belt in front (passenger side), rear right and rear center Checking and replacing three-point belt in front (passenger’s side), rear right and rear center Includes: Checking three-point belts Replacing three-point belt in front (passenger’s side), rear right and rear center Teaching seat belt pretensioner Labor time: 233 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857706J A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QQ 1 ea. Sep 29, 2021 Page 28 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 or 9J1857706J OH5 Three-point seat belt, chalk beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OL8 Three-point seat belt, chalk – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OO3 Three-point seat belt, meranti brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OS1 Three-point seat belt, truffle brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OU6 Three-point seat belt, slate gray – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OW4 Three-point seat belt, blackberry – front (passenger’s side) – M-no. 4QQ 1 ea. or forM-no. 4QR 9J1857706G A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 9J1857706G OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QR 1 ea. and 9J1857806J A23 Three-point seat belt, black – rear right 1 ea. or AfterSales Sep 29, 2021 Page 29 of 38 6 Technical Information 9J1857806J OG6 Three-point seat belt in bordeaux red – rear right 1 ea. or 9J1857806J OH7 Three-point seat belt, graphite blue – rear right 1 ea. or 9J1857806J OL8 Three-point seat belt, chalk – rear right 1 ea. or 9J1857806J OU6 Three-point seat belt, slate grey – rear right 1 ea. and 9J1857807E A23 Three-point seat belt, black – rear center 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling (rear) – belt reel (front / rear) 5 ea. N 90910102 Lens-type screw, M5 x 18 – T-hook 1 ea. N 91074201 Internal hexagon round-head bolt, M5 x 16 – belt deflector 1 ea. PAF912806 Internal serration screw – belt installling 1 ea. Damage Code AMB6 99 000, Repair Code 2 Scope 25: Checking and replacing three-point belt in front (passenger side), rear left and rear center Checking and replacing three-point belt in front (passenger’s side), rear left and rear center Includes: Checking three-point belts Replacing three-point belt in front (passenger’s side), rear left and rear center Teaching seat belt pretensioner Labor time: 244 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Sep 29, 2021 Page 30 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Required part numbers: Designation Qty. 9J1857706J A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OH5 Three-point seat belt, chalk beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OL8 Three-point seat belt, chalk – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OO3 Three-point seat belt, meranti brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OS1 Three-point seat belt, truffle brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OU6 Three-point seat belt, slate gray – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OW4 Three-point seat belt, blackberry – front (passenger’s side) – M-no. 4QQ 1 ea. or with M-no. 4QR 9J1857706G A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or AfterSales Sep 29, 2021 Page 31 of 38 6 Technical Information 9J1857706G OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QR 1 ea. and 9J1857805J A23 Three-point seat belt, black – rear left 1 ea. or 9J1857805J OG6 Three-point seat belt in bordeaux red – rear left 1 ea. or 9J1857805J OH5 Three-point seat belt, chalk beige – rear left 1 ea. or 9J1857805J OI9 Three-point seat belt, atacama beige – rear left 1 ea. or 9J1857805J OL8 Three-point seat belt, chalk – rear left 1 ea. or 9J1857805J OS1 Three-point seat belt, truffle brown – rear left 1 ea. or 9J1857805J OU6 Three-point seat belt, slate grey – rear left 1 ea. or 9J1857805J OW4 – Three-point seat belt, blackberry – rear left 1 ea. and 9J1857807E A23 Three-point seat belt, black – rear center 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling (rear) – belt reel (front / rear) 6 ea. N 90910102 Lens-type screw, M5 x 18 – T-hook 1 ea. Sep 29, 2021 Page 32 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 N 91074201 Internal hexagon round-head bolt, M5 x 16 – belt deflector 1 ea. PAF912806 Internal serration screw – belt installling 1 ea. Damage Code AMB6 99 000, Repair Code 2 Scope 26: Checking and replacing three-point belt in front (passenger side), rear left and rear right Checking and replacing three-point belt in front (passenger’s side), rear left and rear right Includes: Checking three-point belts Replacing three-point belt in front (passenger’s side), rear left and rear right Teaching seat belt pretensioner Labor time: 181 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857706J A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OH5 Three-point seat belt, chalk beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OL8 Three-point seat belt, chalk – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OO3 Three-point seat belt, meranti brown – front (passenger’s side) – M-no. 4QQ 1 ea. or AfterSales Sep 29, 2021 Page 33 of 38 6 Technical Information 9J1857706J OS1 Three-point seat belt, truffle brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OU6 Three-point seat belt, slate gray – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OW4 Three-point seat belt, blackberry – front (passenger’s side) – M-no. 4QQ 1 ea. or with M-no. 4QR 9J1857706G A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 9J1857706G OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QR 1 ea. and 9J1857805J A23 Three-point seat belt, black – rear left 1 ea. or 9J1857805J OG6 Three-point seat belt in bordeaux red – rear left 1 ea. or 9J1857805J OH5 Three-point seat belt, chalk beige – rear left 1 ea. or 9J1857805J OI9 Three-point seat belt, atacama beige – rear left 1 ea. or 9J1857805J OL8 Three-point seat belt, chalk – rear left 1 ea. or 9J1857805J OS1 Three-point seat belt, truffle brown – rear left 1 ea. Sep 29, 2021 Page 34 of 38 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 or 9J1857805J OU6 Three-point seat belt, slate grey – rear left 1 ea. or 9J1857805J OW4 – Three-point seat belt, blackberry – rear left 1 ea. and 9J1857806J A23 Three-point seat belt, black – rear right 1 ea. or 9J1857806J OG6 Three-point seat belt in bordeaux red – rear right 1 ea. or 9J1857806J OH7 Three-point seat belt, graphite blue – rear right 1 ea. or 9J1857806J OL8 Three-point seat belt, chalk – rear right 1 ea. or 9J1857806J OU6 Three-point seat belt, slate grey – rear right 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16″ – 20 x 32 – belt installling (rear) – belt reel (front / rear) 5 ea. N 90910102 Lens-type screw, M5 x 18 – T-hook 1 ea. N 91074201 Internal hexagon round-head bolt, M5 x 16 – belt deflector 1 ea. PAF912806 Internal serration screw – belt installling 1 ea. Damage Code AMB6 99 000, Repair Code 2 AfterSales Sep 29, 2021 Page 35 of 38 6 Technical Information Checking and replacing three-point belt in front (passenger’s side), rear left, rear right and rear center Includes: Checking three-point belts Replacing three-point belt in front (passenger’s side), rear left, rear right and rear center Teaching seat belt pretensioner Labor time: 256 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation Qty. 9J1857706J A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OH5 Three-point seat belt, chalk beige – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OL8 Three-point seat belt, chalk – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OO3 Three-point seat belt, meranti brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OS1 Three-point seat belt, truffle brown – front (passenger’s side) – M-no. 4QQ 1 ea. or 9J1857706J OU6 Three-point seat belt, slate gray – front (passenger’s side) – M-no. 4QQ 1 ea. or Sep 29, 2021 Page 36 of 38 AfterSales AMB6 ENU Seervic 134/21 Scope 27: Checking and replacing three-point belt in front (passenger side), rear left, rear right and rear center Technical Information Service 134/21ENU AMB6 6 9J1857706J OW4 Three-point seat belt, blackberry – front (passenger’s side) – M-no. 4QQ 1 ea. or forM-no. 4QR 9J1857706G A23 Three-point seat belt, black – front (passenger’s side) – M-no. 4QR 1 ea. or 9J1857706G OG6 Three-point seat belt, bordeaux red – front (passenger’s side) – M-no. 4QR 1 ea. and 9J1857805J A23 Three-point seat belt, black – rear left 1 ea. or 9J1857805J OG6 Three-point seat belt in bordeaux red – rear left 1 ea. or 9J1857805J OH5 Three-point seat belt, chalk beige – rear left 1 ea. or 9J1857805J OI9 Three-point seat belt, atacama beige – rear left 1 ea. or 9J1857805J OL8 Three-point seat belt, chalk – rear left 1 ea. or 9J1857805J OS1 Three-point seat belt, truffle brown – rear left 1 ea. or 9J1857805J OU6 Three-point seat belt, slate grey – rear left 1 ea. or 9J1857805J OW4 – Three-point seat belt, blackberry – rear left 1 ea. and AfterSales Sep 29, 2021 Page 37 of 38 6 Technical Information 9J1857806J A23 Three-point seat belt, black – rear right 1 ea. or 9J1857806J OG6 Three-point seat belt in bordeaux red – rear right 1 ea. or 9J1857806J OH7 Three-point seat belt, graphite blue – rear right 1 ea. or 9J1857806J OL8 Three-point seat belt, chalk – rear right 1 ea. or 9J1857806J OU6 Three-point seat belt, slate grey – rear right 1 ea. and 9J1857807E A23 Three-point seat belt, black – rear center 1 ea. Additional parts required for replacing the three-point belt N 98926102 Cylinder screw, 7/16” – 20 x 32 – belt installling (rear) – belt reel (front / rear) 7 ea. N 90910102 Lens-type screw, M5 x 18 – T-hook 1 ea. N 91074201 Internal hexagon round-head bolt, M5 x 16 – belt deflector 1 ea. PAF912806 Internal serration screw – belt installling 1 ea. Damage Code AMB6 99 000, Repair Code 2 Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2021 Porsche Cars North America, Inc. Sep 29, 2021 Page 38 of 38 AfterSales AMB6 ENU Seervic 134/21**************************************************************************************************************Technical Information Service 134/21ENU AMB6 6 AMB6 – Checking Three-Point Belt and Replacing it if Necessary (Stop Delivery/Recall Campaign) Model Line: Cayenne (9YA/9YB) Model Year: As of 2021 up to 2022 Country/Market: USA (C02) Canada (C36) Concerns: Child locking function on rear center three-point belt Information: There is a possibility that the child-seat lock on the three-point belts in the affected vehicles will not always function properly due to a defective locking lever. As a result, the legal requirements for the child-seat lock function of the three-point belts may not be met. Action required: Check rear center three-point belt and replace it if necessary. Affected Vehicles: Only vehicles assigned to the campaign (see also PCSS Vehicle Information). Parts required If necessary remove the parts from the corresponding invoicing scope after checking the three-point belt. For invoicing scopes, see Technical Information ‘Warranty processing’ Required tools Information No tools are required for checking the three-point belt. Tools: • Torque wrench, 6 – 50 Nm (4.5 – 37 ftlb.), e.g. VAG 1331A Torque wrench, 6-50 Nm (4.5-37 ftlb.) • 9943 – 9943 – Removal tool Checking rear center three-point belt Work Procedure: Checking rear center three-point belt AfterSales Sep 29, 2021 Page 1 of 10 6 Technical Information Closing three-point belt 1 Insert three-point belt with the seat-belt fastener into the seat-belt buckle and lock it Closing three-point belt. 2 Pull belt strap about 200 mm – 250 mm/ 7.87 in— 9.84 in out of the belt installing and hold in place with your hand Holding belt strap -Left picture-. Holding belt strap Pulling out belt strap 3 While holding the belt strap with your hand, Holding belt strap -Right picture- pull the belt strap out fully Pulling out belt strap to activate the child locking function (ALR automatic locking retractor). Sep 29, 2021 Page 2 of 10 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Retracting belt strap 4 Allow the belt strap to retract slowly, checking whether an audible click can be heard while it retracts Retracting belt strap. Keep holding the belt strap with your hand. Pulling out belt strap and checking belt locking system 5 As soon as the belt strap has retracted, check whether it can be pulled out completely again or is blocked Pulling out belt strap and checking belt locking system. When checking the three-point belt, if you discover that the belt strap does not block, the three-point belt affected must be replaced. To do this, continue with: • Technical Information ‘Replacing rear centre three-point belt’ If the belt strap blocks and an audible click can be heard when the three-point belt retracts: • Repeat steps 1 to 5 four times Information If the child-lock function does not comply with specifications once during the five checks, the three-point belt in question must be replaced. If five tests confirm that the child locking function of the three-point belt works according to specifications, the three-point belt does not have to be replaced. If the three-point belt works according to specifications, the campaignmust be completed as follows: • Enter the campaign in the Warranty and Maintenance booklet • End of remedial action AfterSales Sep 29, 2021 Page 3 of 10 6 Technical Information Replacing rear center three-point belt WARNING Incorrect handling of seat-belt pretensioner unit • Triggering of seat-belt pretensioner unit Observe safety regulations for handling seat-belt pretensioner units. WorkshopManual ‘6X00IN Handling and replacing airbag and seat-belt pretensioner units’ Observe disposal regulations for seat-belt pretensioner units. Workshop Manual ‘6X00IN Disposal of airbag and seat-belt pretensioner units’ After disconnecting the battery, wait 1minute before disconnecting the seat-belt pretensioner unit. Set aside the remote control and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Workshop Manual ‘978519 Removing and installing ground strap for battery’ If removed for an extended period, the seat-belt pretensioner unitmust be stored in a safe place. Transport the seat-belt pretensioner unit in such a way that the belt strap can retract safely if it is actuated. Information Dispose of replaced and non-ignited airbag and seat-belt pretensioner units in accordance with local legal requirements and transport regulations. Work Procedure: Preparatory work 1 Remove the rear seat padding (2/3-split folding rear seat). Workshop Manual ‘74491901 Removing and installing the padding for the rear seat surface (2/3-split folding rear seat)’ 2 Remove rear seat. Workshop Manual ‘724819 Removing and installing rear seat’ 3 Remove rear (outer) trim panel. Workshop Manual ‘72161901 Removing and installing rear (outer) trim panel’ 4 Detach padding for rear backrest (2/3-split folding rear seat) until the three-point belt for the rear middle seat is accessible. For instructions, see: Workshop Manual ‘74521901 Removing and installing padding for rear backrest (2/3-split folding rear seat)’ Sep 29, 2021 Page 4 of 10 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Information The headrest and headrest guides do not have to be removed. Padding for rear backrest (2/3-split folding rear seat) 5 Lift up padding for rear backrest (2/3-split folding rear seat) Padding for rear backrest (2/3-split folding rear seat) -1- with rear backrest cover (2/3-split folding rear seat) Padding for rear backrest (2/3-split folding rear seat) -2- until the belt retractor for the rear three-point belt for middle seat Padding for rear backrest (2/3-split folding rear seat) -3- is accessible. Work Procedure: Removing rear center three-point belt Belt feed-through element 1 Release locking lug Belt feed-through element -1- and remove belt feed-through element Belt feed-through element -2- from rear three-point belt for middle seat Belt feed-through element -3-. AfterSales Sep 29, 2021 Page 5 of 10 6 Technical Information Fastening nut on belt retractor 2 Unscrewfasteningnut Fastening nut on belt retractor -1-. Three-point belt for rear middle seat 3 Feed three-point belt for rear middle seat Three-point belt for rear middle seat -3- through the rear backrest cover (2/3-split folding rear seat) Three-point belt for rear middle seat -2-, padding for rear backrest (2/3-split folding rear seat) Three-point belt for rear middle seat -1- and backrest frame. Belt retractor for three-point belt 4 Remove rear three-point belt for middle seat Belt retractor for three-point belt -2- under the padding for rear backrest (2/3-split folding rear seat). Installing new rear center three-point belt Sep 29, 2021 Page 6 of 10 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Belt retractor for three-point belt 1 Feednew three-point belt for rear middle seat Belt retractor for three-point belt -2- under the padding for rear backrest (2/3-split folding rear seat). Information Do not twist the three-point seat belt during installation. Rear three-point belt for middle seat 2 Feednew three-point belt for rear middle seat Rear three-point belt for middle seat -3- through the rear backrest cover (2/3-split folding rear seat) Rear three-point belt for middle seat -2-, padding for rear backrest (2/3-split folding rear seat) Rear three-point belt for middle seat -1- and backrest frame. AfterSales Sep 29, 2021 Page 7 of 10 6 Technical Information Fastening nut on belt retractor 3 Installnew fastening nut Fastening nut on belt retractor -1- and tighten to Tightening torque 40 Nm (30 ftlb.) . Belt feed-through element 1 Install belt feed-through element Belt feed-through element -2- for three-point belt for rear middle seat Belt feed-through element -3-. Work Procedure: Concluding work 1 Install padding for rear backrest (2/3-split folding rear seat). Workshop Manual ‘74521901 Removing and installing padding for rear backrest (2/3-split folding rear seat)’ 2 Install rear (outer) trim panel. Workshop Manual ‘72161901 Removing and installing rear (outer) trim panel’ 3 Install rear seat. Workshop Manual ‘724819 Removing and installing rear seat’ 4 Install the rear seat padding (2/3-split folding rear seat) ( Workshop Manual ‘74491901 Removing and installing the padding for the rear seat surface (2/3-split folding rear seat)’). 5 Enter the campaign in the Warranty and Maintenance booklet. Sep 29, 2021 Page 8 of 10 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 Warranty processing Scope 1: Checking three-point belt Checking three-point belt Includes: Checking three-point belt Labor time: 29 TU Damage Code AMB6 99 000 1 Scope 2-31: Not relevant for this vehicle type. Scope 32: Checking and replacing rear center three-point belt Checking and replacing rear center three-point belt Includes: Checking three-point belt Replacing rear center three-point belt Labor time: 77 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation – Use Qty. 9Y0857807A HCP Three-point seat belt, black – rear center 1 ea. 9Y0857807A OG6 Three-point seat belt in bordeaux red – rear center 1 ea. 9Y0857807A OH7 Three-point seat belt, graphite blue – rear center 1 ea. 9Y0857807A OL8 Three-point seat belt, chalk – rear center 1 ea. 9Y0857807A OS1 Three-point seat belt, truffle brown – rear center 1 ea. Additional parts required for replacing the three-point belt N 91205201 Cylinder screw – rear seat (seat frame) 4 ea. 9A700368200 Cylinder screw – belt installing 1 ea. N 98991001 Hexagon nut – belt reel 1 ea. AfterSales Sep 29, 2021 Page 9 of 10 Damage Code AMB6 99 000 2 6 Technical Information Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2021 Porsche Cars North America, Inc. Sep 29, 2021 Page 10 of 10 AfterSales AMB6 ENU Seervic 134/21**************************************************************************************************************Technical Information Service 134/21ENU AMB6 6 AMB6 – Checking Three-Point Belt and Replacing it if Necessary (Stop Delivery/Recall Campaign) Model Line: Panamera (971) Model Year: As of 2021 up to 2022 Country/Market: USA (C02) Canada (C36) Concerns: Child locking function on front three-point belt (passenger’s side) Information: There is a possibility that the child-seat lock on the three-point belts in the affected vehicles will not always function properly due to a defective locking lever. As a result, the legal requirements for the child-seat lock function of the three-point belts may not be met. Action required: Check front three-point belt (passenger’s side) and replace if necessary. Affected Vehicles: Only vehicles assigned to the campaign (see also PCSS Vehicle Information). Parts required If necessary remove the parts from the corresponding invoicing scope after checking the three-point belt. For invoicing scopes, see Technical Information ‘Warranty processing’ Required tools Information No tools are required for checking the three-point belt. Tools: • Battery charger with a current rating of at least 90 A and, if required, also with a current and voltage-controlled chargemap for lithium starter batteries, e.g. VAS 5908 battery charger 90A • 9900 – PIWIS Tester 3 • Torque wrench, 2 – 10 Nm (1.5 – 7.5 ftlb.), e.g. V.A.G 1783 – Torque wrench, 2-10 Nm (1.5-7.5 ftlb.) • Torque wrench, 6 – 50 Nm (4.5 – 37 ftlb.), e.g. VAG 1331A Torque wrench, 6-50 Nm (4.5-37 ftlb.) AfterSales Sep 29, 2021 Page 1 of 6 6 AMB6 ENU Seervic 134/21 Technical Information Checking three-point belt, front (passenger side) Work Procedure: Checking three-point belt, front (passenger side) Closing three-point belt 1 Insert three-point belt with the seat-belt fastener into the seat-belt buckle and lock it Closing three-point belt. Pulling out belt strap 2 Pull the belt strap out completely Pulling out belt strap in order to activate the child locking function (ALR automatic locking retractor). Sep 29, 2021 Page 2 of 6 AfterSales Technical Information Service 134/21ENU AMB6 6 Retracting belt strap 3 Allow the belt strap to retract slowly, checking whether an audible click can be heard while it retracts Retracting belt strap. Pulling out belt strap and checking belt locking system 4 As soon as the belt strap has retracted, check whether it can be pulled out completely again or is blocked Pulling out belt strap and checking belt locking system. When checking the three-point belt, if you discover that the belt strap does not block, the three-point belt must be replaced. To do this, continue with: • Technical Information ‘Replacing front three-point belt (passenger’s side)’ If the belt strap blocks and an audible click can be heard when the three-point belt retracts: • Repeat steps 1 to 4 four times If five tests confirm that the child locking function of the three-point belt works according to specifications, the three-point belt does not have to be replaced. If the three-point belt works according to specifications, the campaignmust be completed as follows: • Enter the campaign in the Warranty and Maintenance booklet • End of remedial action Replacing front three-point belt (passenger’s side) WARNING Incorrect handling of seat-belt pretensioner unit • Triggering of seat-belt pretensioner unit AfterSales Sep 29, 2021 Page 3 of 6 6 Technical Information Observe safety regulations for handling seat-belt pretensioner units. WorkshopManual ‘6X00IN Handling and replacing airbag and seat-belt pretensioner units’ Observe disposal regulations for seat-belt pretensioner units. Workshop Manual ‘6X00IN Disposal of airbag and seat-belt pretensioner units’ After disconnecting the battery, wait 1minute before disconnecting the seat-belt pretensioner unit. Remove ignition key and disconnect the battery. Route or insulate the ground strap so that all contact with a ground carrier is avoided. Workshop Manual ‘2706IN00Work instructions after disconnecting the battery’ If removed for an extended period, the seat-belt pretensioner unitmust be stored in a safe place. Transport the seat-belt pretensioner unit in such a way that the seat belt can retract safely if it is actuated. Information Dispose of replaced and non-ignited airbag and seat-belt pretensioner units in accordance with local legal requirements and transport regulations. Work Procedure: Preparatory work 1 Remove air vent on B-pillar. Workshop Manual ‘856019 Removing and installing air vent on B-pillar’ 2 Remove upper part of B-pillar trim panel. Workshop Manual ‘706719 Removing and installing upper part of B-pillar trim panel’ 3 Remove (rear) inner door sill trim. Workshop Manual ‘680519 Removing and installing (rear) inner door sill trim’ 4 Remove lower part of B-pillar trim panel. Workshop Manual ‘706719 Removing and installing lower part of B-pillar trim panel’ Work Procedure: Replacing front three-point belt (passenger’s side) – Replace front three-point belt (passenger’s side). For instructions see: Workshop Manual ‘691119 Removing and installing front three-point belt’ and Workshop Manual ‘691155 Replacing front three-point belt’ Work Procedure: Concluding work 1 Install lower part of B-pillar trim panel. Workshop Manual ‘706719 Removing and installing lower part of B-pillar trim panel’ Sep 29, 2021 Page 4 of 6 AfterSales AMB6 ENU Seervic 134/21 Technical Information Service 134/21ENU AMB6 6 2 Install (rear) inner door sill trim. Workshop Manual ‘680519 Removing and installing (rear) inner door sill trim’ 3 Install upper part of B-pillar trim panel. Workshop Manual ‘706719 Removing and installing upper part of B-pillar trim panel’ 4 Install air vent on B-pillar. Workshop Manual ‘856019 Removing and installing air vent on B-pillar’ 5 Enter the campaign in the Warranty and Maintenance booklet. Warranty processing Scope 1: Checking three-point belt Checking three-point belt Includes: Checking three-point belt Labor time: 29 TU Damage Code AMB6 99 000 1 Scope 2-30: Not relevant for this vehicle type. Scope 31: Checking and replacing front three-point belt (passenger’s side) Checking and replacing front three-point belt (passenger’s side) Includes: Checking three-point belt Replacing front three-point belt (passenger’s side) – teaching seat-belt pretensioner Labor time: 109 TU Select the relevant version (color) of the three-point belt and specify it in the warranty claim. Required part numbers: Designation – Use Qty. 971857706A A23 Three-point seat belt, black – front (passenger’s side) 1 ea. or 971857706A 3M0 Three-point seat belt in Marsala Red – front (passenger’s side) 1 ea. or 971857706A OG6 Three-point seat belt, Bordeaux Red – front (passenger’s side) 1 ea. AfterSales Sep 29, 2021 Page 5 of 6 6 Technical Information or 971857706A OL8 Three-point seat belt, Chalk – front (passenger’s side) 1 ea. or 971857706A OR1 Three-point seat belt, Agate Grey – front (passenger’s side) 1 ea. Additional parts required for replacing the three-point belt N 90910102 Oval-head screw, M5 x 18 – belt reel (top) – retaining bar 2 ea. N 91269501 Oval-head screw – belt reel 1 ea. 9A700791500 Hexagon-head bolt – Belt installing 1 ea. Damage Code AMB6 99 000 2 Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2021 Porsche Cars North America, Inc. Sep 29, 2021 Page 6 of 6 AfterSales AMB6 ENU Seervic 134/21
SEOCONTENT-END
7 Affected Products
Vehicles
MAKE | MODEL | YEAR |
PORSCHE | 911 | 2021 |
PORSCHE | PANAMERA | 2021 |
PORSCHE | PANAMERA 4 E-HYBRID | 2021 |
PORSCHE | PANAMERA 4S | 2021 |
PORSCHE | PANAMERA GTS | 2021 |
PORSCHE | PANAMERA TURBO S | 2021 |
PORSCHE | TAYCAN | 2021 |
15 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-21V608-1250.PDF 223.463KB
Recall Acknowledgement
RCAK-21V608-2961.pdf 645.346KB
Recall Quarterly Report #1, 2021-4
RCLQRT-21V608-0587.PDF 211.153KB
Manufacturer Notices(to Dealers,etc) – AMB6 Stop delivery – Inspect seat belt and replace if necessary
RCMN-21V608-8639.pdf 126.674KB
Remedy Instructions and TSB
RCRIT-21V608-4451.pdf 531.892KB
Remedy Instructions and TSB
RCRIT-21V608-1430.pdf 648.603KB
Remedy Instructions and TSB
RCRIT-21V608-2639.pdf 583.08KB
Recall Quarterly Report #1, 2021-4
RCLQRT-21V608-0338.PDF 211.155KB
Remedy Instructions and TSB
RCRIT-21V608-9070.pdf 370.166KB
Remedy Instructions and TSB
RCRIT-21V608-5662.pdf 500.433KB
Remedy Instructions and TSB
RCRIT-21V608-6994.pdf 627.537KB
Remedy Instructions and TSB
RCRIT-21V608-7188.pdf 447.194KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V608-6369.pdf 180.896KB
Part 577 Owner Notification Envelope
RONE-21V608-3506.pdf 138.789KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V608-3324.PDF 211.259KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V608&docType=RCL
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
- 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
- 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
- 【alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
- 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
- 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset and EPB service functions. this car scanner will help the part to operate normally after the faults repaired.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- 🎁 New Elite Version🎁 Easy to Use--Work out of Box🎁Function as LAUNCH CRP123E 🎁 Lifetime Update🎁 5 YEARS Back Up.
- [Engine/ABS/SRS/Transmission Diagnostic Tool]----The crp123 obd2 scanner is perfect balance of power and affordability, providing the ability to view preset, or user defined, live data streams for ENGINE, AT, ABS and SRS data, the ability to graph, record, replay and print data, read and resets codes for engine/abs/srs/transmission system.(Note: Does not work for other System and does not have Special services!)
- [Full OBDII Test Code Reader]----LAUNCH CRP123 scan tool supports all 10 modes of OBDII standard to ensure complete, accurate, system diagnosis. Read and Clear DTCs, do smog tests , I/M readiness and O2 sensor tests, Mode 06 EVAP system test, Mode 08 on-board test component test. And OBDII Code lookup tool and acronym database to assist and speed diagnosis and repair time.
- [Live Data Stream + Advanced OBDII Scanner + Lifetime Update]---- Launch crp123 scanner support for Generic OBDII Codes (P0, P2, P3 and U0); manufacturer specific codes (P1, P3 and U1); pending codes; freeze frame data; monitor and I/M readiness; live PCM stream data; graphing functionality for up to four (4) live data streams include the Engine Coolant Temperature, Long&Short Fuel Trim, the change of Accelerator Pedal Position Sensor , Throttle valve position , Generator load signal,Fuel Tank Pressure , Engine RPM, Intake Ait Temperature and so on; clears DTC codes and turns off the MIL; resets monitors; provides Data Link Connector (DLC) location hints.
- [Extensive Vehicle Coverage + 10 Languages]--The LAUNCH CRP123 reads data from ENGINE, TRANSMISSION, ABS and SRS systems from Asian, US and European manufacturers. Coverage includes for Suzuki, for Honda, for Mitsubishi, for Nissan, for Toyota,for Mazda, for Hyundai,for Kia, for Subaru,for Infiniti, for Lexus, for Acura, for Isuzu, for Ford, for GM, for Chrysler, for Benz, for BMW, for VW, for Opel, for Volvo, for Fiat,for Land Rover, for Seat, for Skoda, for Audi,for Porsche, for Saab, for Jaguar and many others. Support 10 different languages.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- 🚌【ABS OBD2 SCANNER】:The FX2000 diagnostic scanner for all vehicles can read and clear the Diagnostic Trouble Codes (DTC) data stream transmitted from the ABS. By retrieving the ABS code data, the obd scanner can check the various brake components and accurately diagnose problems.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- SIMPLIFYING CAR REPAIR - Our goal is to simplify your car repair process. Our device turns your smartphone into a powerful OBD2 scanner diagnostic tool, allowing you to quickly understand your vehicle's problem, view recommended fixes, and purchase the necessary parts for repair.
- EXPERIENCE PROFESSIONAL DIAGNOSTICS - BLCKTEC's enhanced vehicle diagnostics gives you access to advanced features typically found only on high-end scanners. With our car code reader you can read and clear engine codes, ABS (brakes), SRS (airbags), TPMS codes, and many more.
- RELIABLE AND ACCURATE RESULTS - Our car scanner utilizes the latest OBD2 technology to provide accurate and reliable diagnostic information, ensuring that you can trust the results you receive.
- COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Our bluetooth OBD2 scanner works with most vehicles made after 1996, including cars, trucks, and SUVs, making it a versatile tool for any DIYer.
- USER-FRIENDLY APP - Our accompanying app is easy to use and navigate, with clear and concise information displayed in an easy-to-understand format. Available on IOS and Android.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! It comes with h-igh-quality host with a strong box. Get LAUNCH CRP123 Elite car diagnostic scanner and give your lover a surprise!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- 【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world,fit for ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
Last update on 2024-03-27 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.