AJ11 – Brake Line Corrosion may Affect Brake Performance – 2018 Porsche Panamera

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 18V841
Manufacturer Porsche Cars North America, Inc.
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 112

 

Brake Line Corrosion may Affect Brake Performance

Braking ability that is reduced due to a corroded brake line can increase the risk of a crash.

 

Summary

Porsche Cars North America, Inc. (Porsche) is recalling certain 2018 Porsche Panamera Turbo S Hybrid Executive, Panamera 4 Hybrid, Panamera Turbo S Hybrid, Panamera 4 Hybrid Executive, Panamera 4 Hybrid Sport Turismo, and Panamera Turbo S Hybrid Sport Turismo vehicles. The brake lines installed on the front axle may corrode over time. Corrosion inside the line may affect the front braking performance.

 

Remedy

Porsche will notify owners, and dealers will replace the brake line, and any damaged brake components, free of charge. The recall is expected to begin January 27, 2019. Owners may contact Porsche customer service at 1-800-767-7243. Porsche’s number for this recall is AJ11.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Porsche has a Recall

 


Recall Acknowledgement

December 10, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V841-5976.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [242.18 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V841&docType=RCL


 

Bestseller No. 1
Prestone AS401 DOT 3 Synthetic Brake Fluid - 32 oz.
  • Provides an extra margin of safety in extreme braking conditions
  • Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
  • Excellent for ABS, disc and drum brake systems
  • Delivers braking power when needed by avoiding a spongy pedal
  • Both wet and dry boiling points exceed the minimum government standards
Bestseller No. 2
LUCAS OIL 10826 Brake Fluid - 1 Quart
  • High quality blend of polyethylene glycol ethers and additives
  • Compatible with all brake system rubber components and other brake fluids
  • Prevents seal hardening or softening
  • Protects against rust and corrosion
  • Provides excellent lubricity
Bestseller No. 3
BOSCH ESI6-32N Brake Fluid (Direct Replacement for DOT 3, DOT 4, and DOT 5.1) - 1 Quart
  • High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
  • Extended Service Interval (ESI): Lasts 100% longer than DOT 3, 50% longer than DOT 4, and 10% longer than DOT 5. 1
  • Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
  • Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
  • Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
SaleBestseller No. 4
Johnsen's 5034 Premium Synthetic DOT-4 Brake Fluid - 1 Gallon
  • Synthetic quality brake fluid
  • Contains special ingredients to guard against vapor lock and moisture absorption
  • Exceeds requirements for both DOT 3 and DOT 4 brake fluids
  • Specially formulated for DOT 4 brake fluid applications
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 5
Johnsen's 2234 Premium DOT-3 Brake Fluid - 1 Gallon
  • Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
  • Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
  • Mixes with all DOT 3 approved brake fluids
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 6
ACDelco GM Original Equipment 10-4110 DOT 3 Hydraulic Brake Fluid - 16 oz
  • Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
  • High boiling point to minimize brake fluid boiling and vapor lock
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
Bestseller No. 7
Quicksilver 8M0128415 DOT 4 Brake Fluid – 12 Ounce
  • The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
  • Provides corrosion protection in brake components
  • Matches needs of all DOT 4 manufacturer recommendations
  • Compatible with all DOT 3 and DOT 4 applications
SaleBestseller No. 8
Liqui Moly BRAKE FLUID DOT 4 1LTR
  • Premium oil imported from Germany
SaleBestseller No. 9
ATE Original TYP 200 Racing Quality DOT 4 Brake Fluid, 1 Liter Can
  • Minimal decrease of boiling point due to excellent water locking properties
  • Non-foaming when filling and bleeding the brake system
  • Excellent corrosion protection due to selected additives
  • High safety tolerance against steam bubbles
  • Makes brake fluid changing intervals of up to 3 years possible
SaleBestseller No. 10
Motul MTL100949 8068HL RBF 600 Factory Line Dot-4 100 Percent Synthetic Racing Brake Fluid-500, 300. ml, 2 Pack
  • 2 Pack
  • Dry boiling point 594 degrees F
  • Motul 600 brake fluid is 100 percent synthetic and has an extremely high boiling poin
  • Helping to prevent vapor lock and brake fade during hard use
  • This brake fluid exceeds both DOT 3 and DOT 4 specifications

Last update on 2024-04-08 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...