WE33 – Replacing Tank Leakage Diagnosis Module – 2015 Porsche Macan S/Macan Turbo

45/14

Vehicle Type: Macan S/Macan Turbo

Model Year: 2015

Country/Market:

• USA (C02)
• Canada (C36)

Equipment: Tank leakage diagnosis (I-no. 2G4)

Concerns: Tank leakage diagnosis module

 

Information:

This is to inform you of a voluntary Workshop Campaign on the above-mentioned vehicles. There is a possibility that particles of dirt can get into the tank leakage diagnosis module and be deposited on the diaphragm seal under certain environmental conditions.

This can result in incorrect tank leakage diagnosis in some cases.

The Check Engine light will be activated.

 

Action Required:

Replace tank leakage diagnosis module.

 

Affected Vehicles:

The VIN(s) can be checked by using PIWIS Vehicle Information link to verify if the campaign affects the vehicle. This campaign is scope specific to the VIN! Failure to verify in PIWIS may result in an improper repair. This campaign affects 568 vehicles in North America.

 

Parts Info:

Part No.	Designation	Qty.
000.043.209.76	-> Pressure switch for tank leakage diagnosis module	1 ea.
000.043.303.47	-> Grommet for tank leakage diagnosis module	1 ea.
Additional materials required:
…	Tie-wrap, approx. 3.5 mm wide, approx. 140 mm long Similar to Part No. N 106.478.01	1 ea.* (sublet) of the
* The WWS Warranty system will automatically add into the “Miscellaneous item” section claim after the claim has been submitted.

 

Tools:

• Torque screwdriver, e.g. VAS 6494 – torque screwdriver (1.5 – 3 Nm/1 – 2 ftlb.)