“This site contains affiliate links for which OEMDTC may be compensated” |
February 20, 2019 NHTSA CAMPAIGN NUMBER: 19V112000
Loose shock absorbers may impair vehicle steering, increasing the risk of crash.
NHTSA Campaign Number: 19V112
Manufacturer Porsche Cars North America, Inc.
Components SUSPENSION
Potential Number of Units Affected 1
Summary
Porsche Cars North America, Inc. (Porsche) is recalling one 2019 Cayenne Turbo vehicle. The affected vehicle has shock absorber forks that may allow the shock absorbers to loosen.
Remedy
Porsche will notify the owner, and a dealers will replace the shock absorber forks, free of charge. The recall began April 19, 2019. Owners may contact Porsche customer service at 1-800-767-7243. Porsche’s number for this recall is AKA2.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Porsche has a Recall
AKA2 – Replacing Shock Absorber fork on the Front Axle (Stop Delivery/Recall Campaign)
Model Line: | Cayenne (9YA) | ||
Model Year: | As of 2019 | ||
Subject: | Shock absorber forks on front axle | ||
Infomation: | Shock absorber forks with casting defects were installed on the front axle of the affected vehicles.
These casting defects may affect the durability of the shock absorber forks. Cracks can appear in the shock absorber clamp area, causing it to break. In extreme driving situations, the wheel could then tilt in an undefined manner and touch against components around it. This would restrict the steering. |
||
Remedial Action: | Replace shock absorber fork on the front axle. | ||
Affected Vehicles:
|
Only the vehicles assigned to the campaign (see also PIWIS Vehicle information). This campaign affects 1 vehicle in North America.
Information Please note that only one shock absorber fork (front left or front right) must be replaced on each vehicle. Specific campaign scopes have therefore been defined for replacing the shock absorber forks. Every vehicle is clearly assigned just one campaign scope. To find out which campaign scope is assigned to the respective vehicle for replacing the front shock absorber fork on the front axle, see PIWIS Vehicle Information.
For an overview of the campaign scopes, see ⇒Technical Information ‘Warranty processing’.
|
Parts required
Parts Info: | Parts required for replacing the front left shock absorber fork (Scope 1):
Parts required for replacing the front right shock absorber fork (Scope 2):
|
Required tools
Tools: |
|
IMPORTANT SAFETY RECALL
Mr.
April 16, 2019
This notice applies to your vehicle: WPIAF2AY5Y
Recall Number: 19V-112
Subject: | Porsche Safety Recall AKA2 – Replacing shock absorber fork on the front axle -2019 Model Year Porsche Cayenne Turbo Vehicles |
Dear Mr.
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Porsche has decided that a defect which relates to motor vehicle safety exists in certain 2019 Model Year Porsche Cayenne Turbo vehicles. Our records show that you are the owner of a vehicle affected by this action.
What is the issue? | Due to a potential durability issue with the front shock absorbers, the absorber can become cracked and, in some cases even break. This can affect steering in certain driving conditions, increasing the risk of a crash. |
What will we do? | Porsche will remedy this issue by having dealers re-program the affected software for free to prevent this issue from recurring. |
What should you do? | If you hear any unusual noises from the front suspension, please bring your vehicle to your authorized Porsche dealer for immediate service. Please make contact with your authorized Porsche dealership to schedule a repair appointment, and to arrange in advance for a Porsche loaner vehicle should you require alternate transportation during the repair period. Replacing the affected parts is expected to take approximately two hours to complete. |
Lease vehicles and address changes | If you are the lessor and registered owner of the vehicle identified in this action, the law requires you to forward this letter immediately via first-class mail to the lessee within ten days of receipt. If you have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply Card and mail it to us so we can update our records. |
Reimbursement | This recall will be carried out at no expense to the customer. |
Can we assist you further? | Please be aware that if, after we have notified you that replacement parts for your vehicle are available, you require any assistance in making an appointment to have this recall performed, please call or write::
Porsche Cars North America, Inc. |
If you still cannot obtain satisfaction, and your dealer or Porsche is unable to remedy the defect without charge or within a reasonable amount of time, you may file a complaint with:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, S.E.
Washington, D.C. 20590
or call the toll-free Vehicle safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://www.safercar.gov.
We apologize for any inconvenience this matter may cause you. However, we are taking this action to help ensure your safety and continued satisfaction with your vehicle.
Very truly yours,
PORSCHE CARS NORTH AMERICA, INC
Glenn Garde
Vice President, After Sales
SEOCONTENT-START
Technical Information
Service
194/18ENU AKA2 4
AKA2 – Replacing Shock Absorber fork on the Front Axle (Stop Delivery/Recall Campaign)
Model Line: Cayenne (9YA)
Model Year: As of 2019
Subject: Shock absorber forks on front axle
Infomation: Shock absorber forks with casting defects were installed on the front axle of the affected
vehicles.
These casting defects may affect the durability of the shock absorber forks. Cracks can appear in the
shock absorber clamp area, causing it to break. In extreme driving situations, the wheel could then tilt in
an undefined manner and touch against components around it. This would restrict the steering.
Remedial
Action:
Replace shock absorber fork on the front axle.
Affected
Vehicles:
Only the vehicles assigned to the campaign (see also PIWIS Vehicle information). This campaign affects 1
vehicle in North America.
Information
Please note that only one shock absorber fork (front left or front right) must be replaced on each vehicle.
Specific campaign scopes have therefore been defined for replacing the shock absorber forks. Every
vehicle is clearly assigned just one campaign scope.
To find out which campaign scope is assigned to the respective vehicle for replacing the front shock
absorber fork on the front axle, see PIWIS Vehicle Information.
• Scope 1: Replacing shock absorber fork on the left of the front axle.
• Scope 2: Replacing shock absorber fork on the right of the front axle.
For an overview of the campaign scopes, see Technical Information ‘Warranty processing’.
Parts required
Parts Info: Parts required for replacing the front left shock absorber fork (Scope 1):
Part No. Designation
– Use
Qty.
958413037H Shock absorber bracket
– left
1 ea.
AfterSales Mar 20, 2019
Page 1 of 5
4 AKA2 ENU
Seervic
194/18
Technical Information
N 10272202 Hexagon-head bolt, M12 x 1.5 x 95
– Spring strut to shock absorber fork
1 ea.
N 10106402 Hexagon collar nut, M12
– Spring strut to shock absorber fork
1 ea.
N 10784702 Hexagon flange bolt,M12 x 1.5 x 85
– Spring strut to lower trailing arm
1 ea.
PAF001987 Hexagon nut with washer, M12
– Spring strut to lower trailing arm
1 ea.
WHT007061 12 point socket, M10 x 85
– Connecting link to spring strut
1 ea.
N 10286110 Hexagon collar nut, M10
– Connecting link to spring strut
1 ea.
WHT006542 Hexagon flange bolt, M10 x 130 x 26
– Upper trailing arm to wheel bearing housing
1 ea.
N 10272302 Hexagon collar nut, M10
– Upper trailing arm to wheel bearing housing
1 ea.
9Y0615447C Air guide
– left
1 ea.
9A700837900 Tie-wrap, A8.0 x 337
– Air guide to shock absorber fork
2 ea.
Parts required for replacing the front right shock absorber fork (Scope 2):
Part No. Designation
– Use
Qty.
958413038H Shock absorber bracket
– right
1 ea.
N 10272202 Hexagon-head bolt, M12 x 1.5 x 95
– Spring strut to shock absorber fork
1 ea.
N 10106402 Hexagon collar nut, M12
– Spring strut to shock absorber fork
1 ea.
N 10784702 Hexagon flange bolt,M12 x 1.5 x 85
– Spring strut to lower trailing arm
1 ea.
PAF001987 Hexagon nut with washer, M12
– Spring strut to lower trailing arm
1 ea.
WHT007061 12 point socket, M10 x 85
– Connecting link to spring strut
1 ea.
Mar 20, 2019
Page 2 of 5 AfterSales
Technical Information
Service
194/18ENU AKA2 4
N 10286110 Hexagon collar nut, M10
– Connecting link to spring strut
1 ea.
WHT006542 Hexagon flange bolt, M10 x 130 x 26
– Upper trailing arm to wheel bearing housing
1 ea.
N 10272302 Hexagon collar nut, M10
– Upper trailing arm to wheel bearing housing
1 ea.
9Y0615448C Air guide
– right
1 ea.
9A700837900 Tie-wrap, A8.0 x 337
– Air guide to shock absorber fork
2 ea.
Required tools
Tools: • VAS 6931 – Transmission and Engine Jack
• Torque wrench, 4.5 – 37 ftlb. (6 – 50 Nm), e.g. V.A.G 1331A – Torque wrench, 4.5-37 ftlb.
(6-50 Nm)
• Torque wrench, 30 – 148 ftlb. (40 – 200 Nm), e.g. V.A.G 1332 – Torque wrench, 30-148 ftlb.
(40-200 Nm)
• 3424 – Spreader
• VAS 6927 – Tie-wrap pliers
Replacing shock absorber fork on the front axle
Work Procedure: 1 Raise the vehicle on a lifting platform Workshop Manual ‘Lifting the vehicle’.
2 Depending on which side of the vehicle is affected, remove the front left or front right wheel
Workshop Manual ‘Removing and installing wheel’.
3 Replace shock absorber fork on the front axle.
For instructions, see Workshop Manual ‘Removing and installing shock absorber forks’.
4 Install wheel on the front axle Workshop Manual ‘Removing and installing wheel’.
5 Lower the vehicle and remove it from the lifting platform Workshop Manual ‘Lifting the vehicle’.
AfterSales Mar 20, 2019
Page 3 of 5
4 Technical Information
Working time:
Replacing shock absorber fork on the left of the front axle Labor time: 91 TU
Includes:
Raising and lowering the vehicle
Removing and installing wheel on left of front axle
Parts required:
958413037H Shock absorber bracket (left) 1 ea.
N 10272202 Hexagon-head bolt, M12 x 1.5 x 95 1 ea.
N 10106402 Hexagon collar nut, M12 1 ea.
N 10784702 Hexagon flange bolt, M12 x 1.5 x 85 1 ea.
PAF001987 Hexagon nut with washer, M12 1 ea.
WHT007061 12 point socket, M10 x 85 1 ea.
N 10286110 Hexagon collar nut, M10 1 ea.
WHT006542 Hexagon flange bolt, M10 x 130 x 26 1 ea.
N 10272302 Hexagon collar nut, M10 1 ea.
9Y0615447C Air guide (left) 1 ea.
9A700837900 Tie-wrap, A8.0 x 337 2 ea.
Damage Code AKA2 066 000 2
Mar 20, 2019
Page 4 of 5 AfterSales
AKA2 ENU
Seervic
194/18
Warranty processing
Scope 1: Replacing shock absorber fork on the left of the front axle
Technical Information
Service
194/18ENU AKA2 4
WHT007061 12 point socket, M10 x 85 1 ea.
N 10286110 Hexagon collar nut, M10 1 ea.
WHT006542 Hexagon flange bolt, M10 x 130 x 26 1 ea.
N 10272302 Hexagon collar nut, M10 1 ea.
9Y0615448C Air guide (right) 1 ea.
9A700837900 Tie-wrap, A8.0 x 337 2 ea.
Damage Code AKA2 066 000 2
Important Notice: Technical Bulletins issued by Porsche Cars North America, Inc. are intended only for use by professional automotive technicians who have attended Porsche service training
courses. They are written to inform those technicians of conditions that may occur on some Porsche vehicles, or to provide information that could assist in the proper servicing of a vehicle. Porsche special
tools may be necessary in order to perform certain operations identified in these bulletins. Use of tools and procedures other than those Porsche recommends in these bulletins may be detrimental to the
safe operation of your vehicle, and may endanger the people working on it. Properly trained Porsche technicians have the equipment, tools, safety instructions, and know-how to do the job properly and
safely. Part numbers listed in these bulletins are for reference only. The work procedures updated electronically in the Porsche PIWIS diagnostic and testing device take precedence and, in the event of a
discrepancy, the work procedures in the PIWIS Tester are the ones that must be followed. © 2019 Porsche Cars North America, Inc.
AfterSales Mar 20, 2019
Page 5 of 5
Scope 2: Replacing shock absorber fork on the right of the front axle
Labor time: 91 TU
Working time:
Replacing shock absorber fork on the right of the front axle
Includes:
Raising and lowering the vehicle
Removing and installing wheel on right of front axle
1 ea.
1 ea.
1 ea.
1 ea.
Parts required:
958413038H
N 10272202
N 10106402
N 10784702
PAF001987
Shock absorber bracket (right)
Hexagon-head bolt, M12 x 1.5 x 95
Hexagon collar nut, M12
Hexagon flange bolt, M12 x 1.5 x 85
Hexagon nut with washer, M12 1 ea.
SEOCONTENT-END
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
PORSCHE | CAYENNE | 2019 |
7 Associated Documents
Recall Acknowledgement
RCAK-19V112-9547.pdf 245.622KB
Defect Notice 573 Report
RCLRPT-19V112-9066.PDF 212.861KB
Remedy Instructions and TSB
RCRIT-19V112-0713.pdf 77.019KB
ISSUED Owner Notification Letter(Part 577)
RCONL-19V112-7313.pdf 1174.626KB
Recall Quarterly Report #1, 2019-2
RCLQRT-19V112-4941.PDF 211.134KB
Recall Quarterly Report #2, 2019-3
RCLQRT-19V112-5568.PDF 211.23KB
Manufacturer Notices(to Dealers,etc) – AKA2 Stop Delivery / Recall Campaign – Replacing shock absorber fork on the front axle dated 3-13-19 though 8-13-19.
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V112&docType=RCL
- DEEP & EFFECTIVE CLEANING: Foaming gel sticks for deep cleaning
- SPECIALIZED FOR BLACK WHEELS: Formulated for all black wheel finishes
- POWERFUL & SAFE: Maximum cleaning yet gentle on wheels
- CLINGING ACTION: Formula dwells on the surface for more effective cleaning
- VERSATILE USE: Safely and effectively cleans glossy, matte, satin, and black chrome wheels
- This acid-free wheel, tire, and brake cleaner is safe for all wheel types and finishes, including, steel, aluminum, chrome, paint, powder coat, and more. This cleaner is harsh on removing brake dust, iron, and road fallout, but easy on your rims.
- Restore your tires and wheels to a factory-fresh color. Just spray it on, let it clean, and agitate with a soft bristle brush on the face, barrel, tire, and brake parts to break up stubborn contaminants. Just spray with water afterward and clean with a microfiber towel.
- Can be used straight from the bottle or diluted in a foam sprayer. This product can be diluted in any foam sprayer to create a generous foram that easily lifts first, brake dust, and road contaminants from the wheel and tire.
- Leaves a protective coating that helps repel any future tarnishing, staging, or grime buildup. In addition, you can easily and safely apply wheel and tire sealants to extend the life of your clean and shiny wheels.
- ✅ ELIMINATES DIRT, BROWNING, AND BRAKE DUST - Which part of your car takes the biggest beating? Your wheels & Tires! Between the heat, elements, and constant brake contaminants your wheels are almost immediately dirty. Adam’s Wheel & Tire Cleaner is a specifically formulated chemical designed to target heavy brake dust and restore your tires back to factory color.
- ✅ SAFE ON MANY FINISHES - Safe on clear-coated, powder-coated, chrome, alloy, and painted wheels. Most wheel cleaners can be harmful to your wheel finish and dissolve more than what you wanted to clean off! Adam’s Polishes Wheel & Tire Cleaner gets to work fast and dissolves stubborn metallic contamination.
- ✅ GET RID OF BROWN TIRES - If you’re happy with brown, old and decrepit tires, look away! If you’re wanting to thoroughly clean your vehicle’s shoes and make them look like new again, then look no further! Adam's Wheel & Tire Cleaner contains a blend of alkaline-concentrated solvents and surfactants to create a high sudsing formula and removes silicones, greases, wax build-up, polymers, and any previously applied dressings to leave your tires and wheels looking new.
- ✅ EXTEND YOUR TIRE DRESSINGS LIFE - Adam’s Wheel & Tire Cleaner is a detailing essential for any user, from rookie to professional. When investing in premium protective options, high foaming soaps, and ultra-premium microfiber towels, your vehicle's shoes need to be kept clean to not take away from the rest of the vehicle. If you choose not to clean your tires, your tire dressings have no chance of sticking around. Clean your tires before with Wheel & Tire Cleaner to maximize your tire shine.
- ✅ 110% SATISFACTION GUARANTEE - At Adam’s, we strive to bring the BEST waxes, sealants, ceramic coatings, microfiber towels, wash mitts, garage tools, accessories, detailing kits, sponges, applicators and other high-quality car cleaning products to our customers. If you don’t agree & are not satisfied, let us know and we’ll do everything we can to make it right!
- TOUGH ON GRIME - Signature Series is a strong citrus-based wheel cleaner that is tough on brake dust and filth, but gentle and safe for most wheel finishes and materials.
- NATURAL CITRUS CLEANING POWER - Signature Series Wheel Cleaner is blended with natural citrus extracts for powerful cleaning of dirt, grime, and brake dust. Brake dust contains corrosive iron and carbon deposits that can destroy wheels.
- SUPER CONCENTRATED - Adding Signature Series to normal wheel cleanings reduces buildup and corrosion and protects a pristine showroom shine; Clean rubber tire sidewalls to ensure tire shine dressings last longer and look better!
- WE MAKE LOOKING GOOD EASY - Spray the cleaner directly onto alloy wheels, plastic wheel covers, brake parts, suspension parts, plastic fender liners, or undercarriage parts to break down caustic grime and filth.
- THE GO TO BRAND IN CAR CARE - Beginners and professionals alike choose Chemical Guys, not only for the finest car care products, but the world class customer support and vast detailing knowledge Chemical Guys is more than a brand it's a lifestyle with a worldwide following
- Powerful formula improves the appearance of all types of wheels without hazing or discoloration
- Gentle chemistry is pH neutral and is safe for use on ABS plastic, chrome, aluminum, wire, and mag wheels
- Safe with clear coat, polished, painted, or anodized finish
- No scrubbing needed, just apply, hose off and wipe clean.
- Dissolves brake dust, dirt, and road grime quickly and easily.
- THICK & STICKY - Sticky Citrus Gel is a thick viscosity wheel cleaner that clings to wheels and rims, keeping the all-natural formula exactly where you need it fighting dirt and debris without rolling off!
- CLINGY FORMULA FOR MINIMAL SCRUBBING - Sticky Citrus clings to wheels and vertical surfaces, suspending road grime, brake dust, oil, and dirt and then lifting it off the wheel safely and gently.
- SAFE FOR ALL WHEEL TYPES - Formulated with all-natural citrus extracts, and without highly-caustic cleaners. Sticky Citrus Gel combines natural cleaners with oxygen generators to clean any wheel type safely and effectively, without any harm to you or the environment.
- EASY-TO-USE - Spray Sticky Citrus over filthy wheel parts, and watch as it sticks to the filthiest surfaces for a deeper clean using less product!
- THE GO TO BRAND IN CAR CARE - Beginners and professionals alike choose Chemical Guys, not only for the finest car care products, but the world class customer support and vast detailing knowledge Chemical Guys is more than a brand it's a lifestyle with a worldwide following
- FOAMING CLEANER FOR YOUR WHEELS & RIMS - Oxygen-infused cleaners and slick lubricants in Sprayable Diablo Wheel Cleaner form a foaming lather to lubricate surfaces and gently guide dirt and grime off of your wheels for the gentlest and most thorough clean available.
- BEGINNER AND PROFESSIONAL DETAILER FRIENDLY – Chemical Guys makes products for beginners and experts alike. Chemical Guys products are professional grade to get the best results and are also simple enough for even a beginner to achieve immediate results.
- Chemical Guys Sticky Citrus Wheel Cleaner Gel is the all-natural solution that cleans and degreases nasty wheels fast. Customers and clients requested a product that would remove stubborn brake dust with minimal scrubbing countless times.
- PRESERVE YOUR SENSITIVE WHEEL & RIM FINISHES - Brake dust and road filth are not just ugly, they will destroy your wheels if left unchecked. Diablo wheel gel removes abrasive and corrosive particulates before they can damage your sensitive wheel finishes.
- SAFELY CLEAN ANY TYPE OF WHEEL WITHOUT SCRATCHING - Unlike other wheel cleaners, Diablo Wheel Gel uses no caustic acids or heavy alkaline compounds and won’t harm your shiny wheel finishes while your clean. The advanced foaming formula safely lifts dirt and grime to help prevent scratches and swirls.
- ✅ WHY CHOOSE ADAM’S WHEEL CLEANER? - Which part of your car takes the biggest beating? Your wheels! Due to constant heat, elements, & constant brake contaminants, your wheels are almost always dirty. Adam’s wheel cleaning chemical formula was specifically formulated to target & eliminate heavy brake dust and leave your wheels spotless!
- ✅ ADVANCED CHEMICAL TECHNOLOGY - Our Wheel Cleaner was made to compliment your arsenal of car cleaning supplies. Every basic auto detailing kit needs an effective wheel cleaner, car wash soap, tire shine, & some sort of paint protection. This state of the art wheel cleaner is a simple spray & agitate formula. This chemical is certain to be the best wheel cleaner and brake dust remover that you have ever used.
- ✅ CAR CLEANING MADE EASY - Most wheel cleaners can be harmful to your wheel finish and dissolve more than what you wanted to clean off! Adam’s Polishes Wheel Cleaner gets to work fast and dissolves stubborn metallic contamination. Simply spray our Wheel Cleaner & watch as the brake dust bleeds bright purple & falls off! This acid-free and pH neutral formula penetrates dirt and grime at the source and makes your wheel cleaning time significantly shorter!
- ✅ IS IT SAFE FOR MY WHEEL FINISH? - Adam’s Wheel Cleaner is safe on almost all wheel finishes, which includes clear-coated, powder-coated, chrome, alloy, and painted wheels. However, it may not be safe on anodized raw aluminum, polished aluminum wheels, and aftermarket bare metallic wheels. If you are not sure reach out to us by sending us a message or simply try our Eco Wheel Cleaner or Wheel & Tire Cleaner!
- ✅ 110% SATISFACTION GUARANTEE & USA MADE - At Adam’s, we strive to bring the BEST car cleaning supplies, auto detailing kits, washing accessories, microfiber towels, waxes, sealants, ceramic coatings, mops, brushes, mitts, sponges, garage tools, applicators & other high-quality car cleaning products to the car care industry. If you are not satisfied, let us know & we’ll do everything we can to make it right!
Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.